[PATCH 4/8] ARM: dts: imx7d-meerkat96: disable lcdif node

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>

The LCDIF node is enabled, but no display panel is connected through the
required graph bindings. As a result, the LCDIF DT description is
incomplete and triggers DT schema validation warnings.

 arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dtb: lcdif at 30730000 (fsl,imx7d-lcdif): 'port' is a required propert

Disable the LCDIF node until a proper panel node and display pipeline are
added to fix above warnings.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index f0fda15f30204..38f886c25509b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -134,7 +134,7 @@ &i2c4 {
 &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
+	status = "disabled";
 };
 
 &uart1 {

-- 
2.43.0