[PATCH 0/4] arm64: dts: allwinner: add A733/Cubie A7S DTS support

[Enzo Adriano]

Hi Vinicius,

Thanks for the detailed report. I reproduced all three issues and updated
the private v2 candidate.

The Cubie A7S board now defines a correctly named 26 MHz `hosc`. The main
CCU takes `hosc` plus `losc`, `iosc`, and `losc-fanout` from the RTC clock
provider, matching the four-input binding. I also renamed the bus to `soc at 0`
and moved the UART0 pins into the DTSI with `allwinner,pinmux = <2>`.

The MMC binding fix is already in mainline, so v2 will contain three patches
instead of four. I will hold v2 until the public CCU and pinctrl prerequisites
are resolved, then rebuild and retest on that public stack.

Assisted-by: Codex:gpt-5
I reviewed this reply and take responsibility for its contents.

Thanks,
Enzo