[PATCH net-next 3/3] net: stmmac: Add UltraRISC DP1000 GMAC support
Jia Wang
wangjia at ultrarisc.com
Tue Sep 1 01:32:04 PDT 2026
On 2026-09-01 09:29 +0200, Maxime Chevallier wrote:
> Hello,
>
> On 9/1/26 03:27, Jia Wang wrote:
> > The DP1000 GMAC integration provides fixed TX and RX RGMII clock delays
> > that cannot be disabled. For boards without PCB delays, "rgmii-id"
> > describes the link, but passing that mode unchanged to the PHY would enable
> > a second set of delays.
> >
> > Use phy_fix_phy_mode_for_mac_delays() to translate "rgmii-id" to "rgmii"
> > before attaching the PHY. Reject other RGMII modes because the fixed MAC
> > delays cannot be combined with them without duplicating or omitting a
> > delay.
> >
> > Signed-off-by: Jia Wang <wangjia at ultrarisc.com>
>
> Simple enough, this is nice :)
>
> One thing, I'm going to start requiring this for new glue drivers, can you give
> the output of "ethtool -t eth0" on your device with this new glue driver ?
>
> You'll have to enable CONFIG_STMMAC_SELFTESTS
>
> As this is is a 5.20, I'm expecting you'll get something like :
>
> 1. MAC Loopback 0
> 2. MMC Counters 0
> 3. EEE -95
> 4. Hash Filter MC 0
> 5. Perfect Filter UC 0
> 6. MC Filter 0
> 7. UC Filter 0
> 8. Flow Control -95
> 9. RSS -95
> 10. VLAN Filtering -110
> 11. VLAN Filtering (perf) -110
> 12. Double VLAN Filter -110
> 13. Double VLAN Filter (perf) -110
> 14. Flexible RX Parser -95
> 15. SA Insertion (desc) 0
> 16. SA Replacement (desc) 0
> 17. SA Insertion (reg) 0
> 18. SA Replacement (reg) 0
> 19. VLAN TX Insertion -110
> 20. SVLAN TX Insertion -95
> 21. L3 DA Filtering -95
> 22. L3 SA Filtering -95
> 23. L4 DA TCP Filtering -95
> 24. L4 SA TCP Filtering -95
> 25. L4 DA UDP Filtering -95
> 26. L4 SA UDP Filtering -95
> 27. ARP Offload -110
> 28. Jumbo Frame 0
> 29. Multichannel Jumbo -95
> 30. Split Header -95
> 31. TBS (ETF Scheduler) -95
>
> -95 (-EOPNOTSUP) and 0 are OK, watch for any other values.
>
> If ARP Offload and any VLAN selftest (insertion and filtering), this is a known
> issue and you can ignore :)
>
Thanks. I enabled CONFIG_STMMAC_SELFTESTS and ran the test on the Milk-V
Titan with the new glue driver:
1. MAC Loopback 0
2. MMC Counters 0
3. EEE -95
4. Hash Filter MC 0
5. Perfect Filter UC -95
6. MC Filter -95
7. UC Filter -95
8. Flow Control 0
9. RSS -95
10. VLAN Filtering -110
11. VLAN Filtering (perf) -110
12. Double VLAN Filter -110
13. Double VLAN Filter (perf) -110
14. Flexible RX Parser -95
15. SA Insertion (desc) 0
16. SA Replacement (desc) 0
17. SA Insertion (reg) 0
18. SA Replacement (reg) 0
19. VLAN TX Insertion -110
20. SVLAN TX Insertion -110
21. L3 DA Filtering -95
22. L3 SA Filtering -95
23. L4 DA TCP Filtering -95
24. L4 SA TCP Filtering -95
25. L4 DA UDP Filtering -95
26. L4 SA UDP Filtering -95
27. ARP Offload -110
28. Jumbo Frame 0
29. Multichannel Jumbo -95
30. Split Header 0
31. TBS (ETF Scheduler) -95
> Maxime
>
>
Best regards,
Jia Wang
> > ---
> > MAINTAINERS | 1 +
> > drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 +++++
> > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> > .../net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c | 54 ++++++++++++++++++++++
> > 4 files changed, 67 insertions(+)
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 3b96ff0734e6..aacbab369b51 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -28008,6 +28008,7 @@ ULTRARISC DP1000 DWMAC GLUE LAYER
> > M: Jia Wang <wangjia at ultrarisc.com>
> > S: Maintained
> > F: Documentation/devicetree/bindings/net/ultrarisc,dp1000-gmac.yaml
> > +F: drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
> >
> > ULTRARISC DP1000 PINCTRL DRIVER
> > M: Jia Wang <wangjia at ultrarisc.com>
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > index e3dd5adda5ac..ab3c4cf96423 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > @@ -319,6 +319,17 @@ config DWMAC_THEAD
> > the stmmac device driver. This driver is used for T-HEAD TH1520
> > ethernet controller.
> >
> > +config DWMAC_ULTRARISC
> > + tristate "UltraRISC DWMAC support"
> > + default ARCH_ULTRARISC
> > + depends on OF && (ARCH_ULTRARISC || COMPILE_TEST)
> > + help
> > + Support for the Ethernet controller on the UltraRISC DP1000 SoC.
> > +
> > + This selects the UltraRISC platform specific glue layer support
> > + for the stmmac device driver. This driver is used for the DP1000
> > + GMAC Ethernet controller.
> > +
> > config DWMAC_IMX8
> > tristate "NXP IMX8 DWMAC support"
> > default ARCH_MXC
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> > index a1cea2f57252..b16a456b730e 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> > +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> > @@ -36,6 +36,7 @@ obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
> > obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o
> > obj-$(CONFIG_DWMAC_SUN55I) += dwmac-sun55i.o
> > obj-$(CONFIG_DWMAC_THEAD) += dwmac-thead.o
> > +obj-$(CONFIG_DWMAC_ULTRARISC) += dwmac-ultrarisc.o
> > obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
> > obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o
> > obj-$(CONFIG_DWMAC_LOONGSON1) += dwmac-loongson1.o
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
> > new file mode 100644
> > index 000000000000..4bdda2665338
> > --- /dev/null
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
> > @@ -0,0 +1,54 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * UltraRISC DWMAC platform driver
> > + *
> > + * Copyright (C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/phy.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "stmmac_platform.h"
> > +
> > +static int ultrarisc_dwmac_probe(struct platform_device *pdev)
> > +{
> > + struct plat_stmmacenet_data *plat_dat;
> > + struct stmmac_resources stmmac_res;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to get resources\n");
> > +
> > + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> > + if (IS_ERR(plat_dat))
> > + return dev_err_probe(dev, PTR_ERR(plat_dat), "failed to parse DT parameters\n");
> > +
> > + plat_dat->phy_interface =
> > + phy_fix_phy_mode_for_mac_delays(plat_dat->phy_interface, true, true);
> > + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_NA)
> > + return dev_err_probe(dev, -EINVAL, "unsupported phy interface mode\n");
> > +
> > + return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
> > +}
> > +
> > +static const struct of_device_id ultrarisc_dwmac_match[] = {
> > + { .compatible = "ultrarisc,dp1000-gmac" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, ultrarisc_dwmac_match);
> > +
> > +static struct platform_driver ultrarisc_dwmac_driver = {
> > + .probe = ultrarisc_dwmac_probe,
> > + .driver = {
> > + .name = "ultrarisc-dwmac",
> > + .pm = &stmmac_pltfr_pm_ops,
> > + .of_match_table = ultrarisc_dwmac_match,
> > + },
> > +};
> > +module_platform_driver(ultrarisc_dwmac_driver);
> > +
> > +MODULE_DESCRIPTION("UltraRISC DWMAC platform driver");
> > +MODULE_LICENSE("GPL");
> >
>
>
More information about the linux-arm-kernel
mailing list