[PATCH v2 3/6] mtd: rawnand: stm32_fmc2: retire data DMA before unmapping on errors

[Samarth Narang]

When ECC descriptor preparation or submission fails in
stm32_fmc2_nfc_xfer(), the driver unmaps the data scatterlist without
terminating the previously issued DMA descriptor. The descriptor may
remain queued and execute when the next page operation starts,
potentially writing into a buffer that has already been unmapped and
returned to the NAND core. The timeout paths have a similar issue, as
they use dmaengine_terminate_all(), which does not guarantee that DMA
has stopped before the buffer is unmapped.

Terminate the outstanding data descriptor on ECC error paths and use
dmaengine_terminate_sync() on timeout paths, ensuring that DMA has
stopped before the associated mapping is released.

Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Assisted-by: LLM
Signed-off-by: Samarth Narang <samarth.colleges at gmail.com>
---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index c08d6b176..82d630106 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -915,6 +915,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
 						   DMA_PREP_INTERRUPT);
 		if (!desc_ecc) {
 			ret = -ENOMEM;
+			dmaengine_terminate_sync(dma_ch);
 			goto err_unmap_data;
 		}
 
@@ -922,8 +923,10 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
 		desc_ecc->callback = stm32_fmc2_nfc_dma_callback;
 		desc_ecc->callback_param = &nfc->dma_ecc_complete;
 		ret = dma_submit_error(dmaengine_submit(desc_ecc));
-		if (ret)
+		if (ret) {
+			dmaengine_terminate_sync(dma_ch);
 			goto err_unmap_data;
+		}
 
 		dma_async_issue_pending(nfc->dma_ecc_ch);
 	}
@@ -939,9 +942,9 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
 	if (!wait_for_completion_timeout(&nfc->complete, timeout)) {
 		dev_err(nfc->dev, "seq timeout\n");
 		stm32_fmc2_nfc_disable_seq_irq(nfc);
-		dmaengine_terminate_all(dma_ch);
+		dmaengine_terminate_sync(dma_ch);
 		if (!write_data && !raw)
-			dmaengine_terminate_all(nfc->dma_ecc_ch);
+			dmaengine_terminate_sync(nfc->dma_ecc_ch);
 		ret = -ETIMEDOUT;
 		goto err_unmap_data;
 	}
@@ -949,7 +952,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
 	/* Wait DMA data transfer completion */
 	if (!wait_for_completion_timeout(&nfc->dma_data_complete, timeout)) {
 		dev_err(nfc->dev, "data DMA timeout\n");
-		dmaengine_terminate_all(dma_ch);
+		dmaengine_terminate_sync(dma_ch);
 		ret = -ETIMEDOUT;
 	}
 
@@ -958,7 +961,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
 		if (!wait_for_completion_timeout(&nfc->dma_ecc_complete,
 						 timeout)) {
 			dev_err(nfc->dev, "ECC DMA timeout\n");
-			dmaengine_terminate_all(nfc->dma_ecc_ch);
+			dmaengine_terminate_sync(nfc->dma_ecc_ch);
 			ret = -ETIMEDOUT;
 		}
 	}
-- 
2.34.1