[PATCH 02/11] pinctrl: scmi: map the schmitt trigger enable to its SCMI type

[Clément Le Goffic]

PIN_CONFIG_INPUT_SCHMITT_ENABLE was sent as INPUT_MODE, which drives
the input buffer, and PIN_CONFIG_INPUT_SCHMITT, a threshold, as
INPUT_SCHMITT, which only takes 0 or 1. Send the enable as
INPUT_SCHMITT and refuse the threshold, the protocol has no type for
it.

Fixes: eb524cb651b7 ("pinctrl: Implementation of the generic scmi-pinctrl driver")
Signed-off-by: Clément Le Goffic <clegoffic at baylibre.com>
---
 drivers/pinctrl/pinctrl-scmi.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-scmi.c b/drivers/pinctrl/pinctrl-scmi.c
index 6bc94c68e89a..5de47e060e8c 100644
--- a/drivers/pinctrl/pinctrl-scmi.c
+++ b/drivers/pinctrl/pinctrl-scmi.c
@@ -128,11 +128,8 @@ static int pinctrl_scmi_map_pinconf_type(enum pin_config_param param,
 	case PIN_CONFIG_INPUT_ENABLE:
 		*type = SCMI_PIN_INPUT_MODE;
 		break;
-	case PIN_CONFIG_INPUT_SCHMITT:
-		*type = SCMI_PIN_INPUT_SCHMITT;
-		break;
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		*type = SCMI_PIN_INPUT_MODE;
+		*type = SCMI_PIN_INPUT_SCHMITT;
 		break;
 	case PIN_CONFIG_MODE_LOW_POWER:
 		*type = SCMI_PIN_LOW_POWER_MODE;

-- 
2.56.0