[PATCH RFC v2 05/14] firmware: qcom: scm: Configure LPAC aperture

[Konrad Dybcio]

On 10/29/26 2:52 PM, Anna Maniscalco wrote:
> In order to be able to update the SMMU registers from CP for page table
> updates we need to configure the LPAC aperture to include the context
> bank that will be associated with SID 1.
> 
> Signed-off-by: Anna Maniscalco <anna.maniscalco2000 at gmail.com>
> ---
>  drivers/firmware/qcom/qcom_scm.c        | 18 ++++++++++++++++++
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c |  6 ++++++
>  drivers/gpu/drm/msm/adreno/adreno_gpu.h |  1 +
>  include/linux/firmware/qcom/qcom_scm.h  |  1 +
>  4 files changed, 26 insertions(+)
> 
> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> index 9b06a69d3a6d..92093399f20d 100644
> --- a/drivers/firmware/qcom/qcom_scm.c
> +++ b/drivers/firmware/qcom/qcom_scm.c
> @@ -1204,6 +1204,7 @@ int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
>  EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg);
>  
>  #define QCOM_SCM_CP_APERTURE_CONTEXT_MASK	GENMASK(7, 0)
> +#define QCOM_SCM_LPAC_APERTURE_CONTEXT_MASK	GENMASK(7, 1)
>  
>  bool qcom_scm_set_gpu_smmu_aperture_is_available(void)
>  {
> @@ -1229,6 +1230,23 @@ int qcom_scm_set_gpu_smmu_aperture(unsigned int context_bank)
>  }
>  EXPORT_SYMBOL_GPL(qcom_scm_set_gpu_smmu_aperture);
>  
> +int qcom_scm_set_gpu_smmu_lpac_aperture(unsigned int context_bank)
> +{

Please make qcom_scm_set_gpu_smmu_aperture() take a parameter instead
- bit 8=0 is QCOM_SCM_CP_APERTURE_REG, bit 8 =1 is
QCOM_SCM_CP_LPAC_APERTURE_REG

Konrad