[PATCH v6 04/18] dt-bindings: soc: starfive: Add starfive,jh7110-hdmi-subsystem
Rob Herring (Arm)
robh at kernel.org
Thu Oct 29 10:38:25 PDT 2026
On Thu, 29 Oct 2026 08:53:38 +0100, Michal Wilczynski wrote:
> Add the dt-binding for the StarFive JH7110 HDMI subsystem.
>
> The JH7110 HDMI IP is a monolithic block containing both the digital
> controller and analog PHY in a single register space. This binding
> defines the parent device, which holds the shared register map, and its
> two children: the PHY and the controller.
>
> The two have separate resources. The PHY takes the 24 MHz reference
> clock and provides both the pixel clock, which the VOUT clock generator
> routes on to the display controller, and the phy the controller uses.
> The controller takes its clocks from the VOUT clock generator. What
> they share is the register space, which the parent maps.
>
> Reviewed-by: Rob Herring (Arm) <robh at kernel.org>
> Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>
> ---
> .../starfive/starfive,jh7110-hdmi-subsystem.yaml | 95 ++++++++++++++++++++++
> 1 file changed, 95 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-hdmi-subsystem.yaml: Unresolvable reference: /schemas/phy/starfive,jh7110-inno-hdmi-phy.yaml#
Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-hdmi-subsystem.example.dtb: hdmi at 29590000 (starfive,jh7110-hdmi-subsystem): phy: False schema does not allow {'compatible': ['starfive,jh7110-inno-hdmi-phy'], '#clock-cells': 0, 'clocks': [[4294967295]], '#phy-cells': 0, 'phandle': 2}
from schema $id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-hdmi-subsystem.yaml
Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-hdmi-subsystem.example.dtb: /example-0/soc/hdmi at 29590000/phy: failed to match any schema with compatible: ['starfive,jh7110-inno-hdmi-phy']
doc reference errors (make refcheckdocs):
See https://patchwork.kernel.org/project/devicetree/patch/20261029-jh7110-clean-send-v6-4-759594e43acf@samsung.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
More information about the linux-arm-kernel
mailing list