[PATCH net v5 2/3] net: stmmac: pass the desired EST enable state to est_configure()

Lorenzo Bianconi lorenzo.bianconi at oss.qualcomm.com
Thu Oct 29 03:33:56 PDT 2026


Pass the desired EST enable state explicitly to est_configure() instead
of having it derive from cfg->enable. This decouples the hardware
programming state from the priv->est->enable flag, which records whether
the taprio offload is attached.

No functional change intended: the callers keep toggling
priv->est->enable around the EST programming, as before.

Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi at oss.qualcomm.com>
---
 drivers/net/ethernet/stmicro/stmmac/hwif.h       | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_est.c | 6 +++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c  | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index b2e557788803..8ae95e91a36a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -620,7 +620,7 @@ struct stmmac_mmc_ops {
 
 struct stmmac_est_ops {
 	int (*configure)(struct stmmac_priv *priv, struct stmmac_est *cfg,
-			 unsigned int ptp_rate);
+			 unsigned int ptp_rate, bool enable);
 	void (*irq_status)(struct stmmac_priv *priv, struct net_device *dev,
 			   struct stmmac_extra_stats *x, u32 txqcnt);
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
index afc516059b89..f15d4d046aa7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
@@ -26,7 +26,7 @@ static int est_write(void __iomem *est_addr, u32 reg, u32 val, bool gcl)
 }
 
 static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
-			 unsigned int ptp_rate)
+			 unsigned int ptp_rate, bool enable)
 {
 	void __iomem *est_addr = priv->estaddr;
 	int i, ret = 0;
@@ -62,7 +62,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
 		ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_GMAC5_PTOV_MUL) <<
 			 EST_GMAC5_PTOV_SHIFT;
 	}
-	if (cfg->enable)
+	if (enable)
 		ctrl |= EST_EEST | EST_SSWL | EST_DFBS;
 	else
 		ctrl &= ~EST_EEST;
@@ -70,7 +70,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
 	writel(ctrl, est_addr + EST_CONTROL);
 
 	/* Configure EST interrupt */
-	if (cfg->enable)
+	if (enable)
 		ctrl = EST_IECGCE | EST_IEHS | EST_IEHF | EST_IEBE | EST_IECC;
 	else
 		ctrl = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index e54a3c887826..9a32af00d7d2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -74,7 +74,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 		mutex_lock(&priv->est_lock);
 		priv->est->enable = false;
 		stmmac_est_configure(priv, priv, priv->est,
-				     priv->plat->clk_ptp_rate);
+				     priv->plat->clk_ptp_rate, false);
 		mutex_unlock(&priv->est_lock);
 	}
 
@@ -105,7 +105,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 		priv->est->btr[1] = (u32)time.tv_sec;
 		priv->est->enable = true;
 		ret = stmmac_est_configure(priv, priv, priv->est,
-					   priv->plat->clk_ptp_rate);
+					   priv->plat->clk_ptp_rate, true);
 		mutex_unlock(&priv->est_lock);
 		if (ret)
 			netdev_err(priv->dev, "failed to configure EST\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index aea235a69105..ac926c60f9f9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1090,7 +1090,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 	tc_taprio_map_maxsdu_txq(priv, qopt);
 
 	ret = stmmac_est_configure(priv, priv, priv->est,
-				   priv->plat->clk_ptp_rate);
+				   priv->plat->clk_ptp_rate, true);
 	mutex_unlock(&priv->est_lock);
 	if (ret) {
 		netdev_err(priv->dev, "failed to configure EST\n");
@@ -1109,7 +1109,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		mutex_lock(&priv->est_lock);
 		priv->est->enable = false;
 		stmmac_est_configure(priv, priv, priv->est,
-				     priv->plat->clk_ptp_rate);
+				     priv->plat->clk_ptp_rate, false);
 		/* Reset taprio status */
 		for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
 			priv->xstats.max_sdu_txq_drop[i] = 0;

-- 
2.56.0




More information about the linux-arm-kernel mailing list