[PATCH v4 04/14] drm/tidss: Drop the tied off video port check from mode validation

[Tomi Valkeinen]

dispc_vp_mode_valid() WARNs and rejects every mode on a video port that
is marked as DISPC_VP_TIED_OFF in the 'vp_bus_type' feat.

The check is redundant, as nothing in the DT will be connected to the
tied off VP, and thus the driver can never do a mode_valid call for it.

Remove the check, and rely on the DT to be correct.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
---
 drivers/gpu/drm/tidss/tidss_dispc.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index efdabf046d64..8c537280faf5 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -1342,12 +1342,6 @@ enum drm_mode_status dispc_vp_mode_valid(struct dispc_device *dispc,
 					 const struct drm_display_mode *mode)
 {
 	u32 hsw, hfp, hbp, vsw, vfp, vbp;
-	enum dispc_vp_bus_type bus_type;
-
-	bus_type = dispc->feat->vp_bus_type[hw_videoport];
-
-	if (WARN_ON(bus_type == DISPC_VP_TIED_OFF))
-		return MODE_BAD;
 
 	if (mode->hdisplay > 4096)
 		return MODE_BAD;

-- 
2.43.0