[PATCH v5 4/7] arm64: dts: imx8-ss-dma: Add lcdif support for i.MX8QXP and i.MX8DXL

[Laurentiu Palcu]

On Tue, Oct 27, 2026 at 11:00:56AM -0400, Frank.Li at oss.nxp.com wrote:
> From: Frank Li <Frank.Li at nxp.com>
> 
> Add lcdif support for i.MX8QXP and i.MX8DXL.

The commit message is incomplete. It doesn't mention why you needed to delete
the nodes in imx8qm-ss-dma.dtsi. I see you deleted those because Sahiko
suggested but it would be worth adding the reason in the commit message as
well.

> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change in v4
> - delete adma_lcdif and lcd_clk_lpcg (sashiko AI)
> ---
>  arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi     | 29 ++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi | 11 ++++++++
>  arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi   |  2 ++
>  3 files changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index 4de78f870c05c..87082c3fa9338 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -149,6 +149,24 @@ lpuart3: serial at 5a090000 {
>  		status = "disabled";
>  	};
>  
> +	adma_lcdif: lcdif at 5a180000 {
> +		compatible = "fsl,imx8qxp-lcdif", "fsl,imx6sx-lcdif";
> +		reg = <0x5a180000 0x10000>;
> +		clocks = <&lcd_clk_lpcg IMX_LPCG_CLK_0>,
> +			 <&lcd_clk_lpcg IMX_LPCG_CLK_4>,
> +			 <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_MISC0>;
> +		clock-names = "pix", "axi", "disp_axi";
> +		assigned-clocks = <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_PER>,
> +				  <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_MISC0>,
> +				  <&clk IMX_SC_R_ELCDIF_PLL IMX_SC_PM_CLK_PLL>;
> +		assigned-clock-parents = <&clk IMX_SC_R_ELCDIF_PLL IMX_SC_PM_CLK_PLL>,
> +					 <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_BYPASS>;
> +		assigned-clock-rates = <0>, <24000000>, <804000000>;
> +		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +		power-domains = <&pd IMX_SC_R_LCD_0>;
> +		status = "disabled";

According to the DTS coding style you should add a blank line before 'status'
line if there is content above it.

With the above issues addressed:
Acked-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>

-- 
Thanks,
Laurentiu