[PATCH 3/3] ARM: dts: BCM5301X: Enable AXI PMUs

[Florian Fainelli]

Describe the three BCM5301X AXI Trace Modules and enable them on the
BCM5301X base DTS file.

Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
---
 arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
index f06a178a9240..dcae7cba37c4 100644
--- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -10,6 +10,21 @@
 
 / {
 	mpcore-bus at 19000000 {
+		axi_pmu_m0: pmu at 3000 {
+			compatible = "brcm,bcm5301x-axi-pmu";
+			reg = <0x3000 0x1000>;
+		};
+
+		axi_pmu_m1: pmu at 4000 {
+			compatible = "brcm,bcm5301x-axi-pmu";
+			reg = <0x4000 0x1000>;
+		};
+
+		axi_pmu_acp: pmu at 7000 {
+			compatible = "brcm,bcm5301x-axi-pmu";
+			reg = <0x7000 0x1000>;
+		};
+
 		a9pll: arm_clk at 0 {
 			#clock-cells = <0>;
 			compatible = "brcm,nsp-armpll";
-- 
2.53.0