[PATCH v3 1/2] dt-bindings: usb: Add Samsung Exynos8855 DWC3 controller binding

[Selvarasu Ganesan]

On 10/26/2026 3:14 PM, Krzysztof Kozlowski wrote:
> On Fri, Oct 23, 2026 at 06:45:00PM +0530, Selvarasu Ganesan wrote:
>> +title: Samsung Exynos8855 DWC3 USB controller
>> +
>> +maintainers:
>> +  - Krzysztof Kozlowski <krzk at kernel.org>
>> +  - Selvarasu Ganesan <selvarasu.g at samsung.com>
>> +
>> +description:
>> +  Describes the DWC3 USB controller block implemented on the Samsung
>> +  Exynos8855 SoC.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - samsung,exynos8855-dwc3
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
> interrupts go after clocks, power-domains after interrupts.


Hi Krzysztof,

Thanks for your comments.
My bad, will update in the next version.


>
>> +
>> +  clocks:
>> +    description: |
>> +      Two clocks are used:
>> +       - ref: Reference clock for SOF/ITP generation.
>> +       - bus: Bus (APB) clock for register access.
>> +    minItems: 2
>> +    maxItems: 2
> Instead replace all this with listing items with description. Don't
> repeat constraints in free form text.
>
> items:
>    - description:
>    - description:
Sure, will update the clocks as below in the next version,

     clocks:
       items:
         - description: Reference clock for SOF/ITP generation.
         - description: Bus (APB) clock for register access.

Thanks,
Selva
>> +
>> +  clock-names:
>> +    items:
>> +      - const: ref
>> +      - const: bus
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - interrupts
> Here you have correct order.
>
> Best regards,
> Krzysztof