[PATCH v4 3/7] drm/panel: simple: Add Waiken WKS101WX001-WCT panel support

[Liu Ying]

On Fri, Oct 23, 2026 at 03:45:11PM -0400, Frank.Li at oss.nxp.com wrote:
> From: Frank Li <Frank.Li at nxp.com>
> 
> Add support for the Waiken WKS101WX001-WCT, an industrial-grade 10.1-inch
> IPS TFT LCD panel with a capacitive touchscreen.
> 
> Although the module advertises LVDS support, enabling LVDS operation
> requires hardware modification, including the removal of several on-board
> resistors. As there are currently no known users of the LVDS configuration,
> only the default interface mode is supported.
> 
> If LVDS support is needed in the future, a dedicated driver can be
> introduced to handle switching between LVDS and DBI modes.

s/DBI/DPI/

I assume that there would be a new compatible string for the panel in LVDS mode,
instead of a new dedicated driver to "handle switching between LVDS and DPI
modes".  So, I'd rather drop the last sentence.

With this address:
Acked-by: Liu Ying <victor.liu at nxp.com>

> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change in v4
> - s/LDB/DPI
> - variable use 101wx001_wct
> 
> change in v3
> - add wct surfix and change to use MEDIA_BUS_FMT_RGB888_1X24
> - Add information about lvds support plan.
> 
> change in v2
> - update height to 135 from 136 (sashiko)
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)

[...]

-- 
Regards,
Liu Ying