[PATCH/DNI 7/7] arm64: dts: renesas: r8a78000: Add gpio-ranges

[Geert Uytterhoeven]

Link all GPIO controllers to the Pin Function Controller using
"gpio-ranges" properties.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
This depends on out-of-tree pin control support.
---
 arch/arm64/boot/dts/renesas/r8a78000.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
index 36a4fa1e032ee703..946dce6ab38b619d 100644
--- a/arch/arm64/boot/dts/renesas/r8a78000.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
@@ -1273,6 +1273,7 @@ gpio0: gpio at c1080110 {
 			resets = <&mdlc_aon 0x20>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 0 28>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1287,6 +1288,7 @@ gpio1: gpio at c1080910 {
 			resets = <&mdlc_aon 0x20>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 32 22>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1301,6 +1303,7 @@ gpio2: gpio at c1081110 {
 			resets = <&mdlc_aon 0x20>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 64 29>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1315,6 +1318,7 @@ gpio3: gpio at c0800110 {
 			resets = <&mdlc_pere 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1329,6 +1333,7 @@ gpio4: gpio at c0800910 {
 			resets = <&mdlc_pere 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 128 16>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1343,6 +1348,7 @@ gpio5: gpio at c0400110 {
 			resets = <&mdlc_perw 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 160 23>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1357,6 +1363,7 @@ gpio6: gpio at c0400910 {
 			resets = <&mdlc_perw 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 192 31>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1371,6 +1378,7 @@ gpio7: gpio at c0401110 {
 			resets = <&mdlc_perw 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 224 31>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1385,6 +1393,7 @@ gpio8: gpio at c0401910 {
 			resets = <&mdlc_perw 0x30>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 256 32>;
 			gpio-reserved-ranges = <16 10>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -1400,6 +1409,7 @@ gpio9: gpio at c9b00110 {
 			resets = <&mdlc_hscn 0x50>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
@@ -1414,6 +1424,7 @@ gpio10: gpio at c9b00910 {
 			resets = <&mdlc_hscn 0x50>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 320 14>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 		};
-- 
2.43.0