[PATCH 3/4] arm64: dts: amlogic: s7: describe the GIC virtualization regions

[Carlo Caione]

The S7 device tree describes the distributor and the CPU interface of
the GIC-400, but not its virtual interface control (GICH) and virtual
CPU interface (GICV) regions. Without them the GIC driver does not hand
the GIC over to KVM, which then runs without the in-kernel vGIC.

Describe both regions at their GIC-400 offsets, as S4 does for its
GIC-400 at the same address.

Signed-off-by: Carlo Caione <ccaione at baylibre.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
index 89b75bec40f0..a337783c7783 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -121,7 +121,9 @@ gic: interrupt-controller at fff01000 {
 			#address-cells = <0>;
 			interrupt-controller;
 			reg = <0x0 0xfff01000 0 0x1000>,
-			      <0x0 0xfff02000 0 0x2000>;
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
 			interrupts = <GIC_PPI 9 0xf04>;
 		};
 

-- 
2.56.0