[PATCH v3 1/4] dt-bindings: connector: Add Toradex camera connector

[Conor Dooley]

On Thu, Oct 22, 2026 at 04:31:25PM +0200, Ernest Van Hoecke wrote:
> From: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>
> 
> Toradex boards route the sideband signals of their 24-pin camera
> connectors to different GPIO controllers. Camera overlays which name
> those controllers directly must therefore be duplicated for each host
> board.
> 
> Describe reset, power-down, detection and power-control as
> connector-local GPIO functions. This lets an accessory overlay remain
> independent of the host wiring. MIPI CSI-2, I2C, clocks and supplies
> remain described separately because the GPIO nexus does not abstract
> them.
> 
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>

Acked-by: Conor Dooley <conor.dooley at microchip.com>
pw-bot: not-applicable
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20261022/9aa4d7a0/attachment.sig>