[PATCH 4/6] arm64: dts: qcom: talos-lyra-evk: Add Waveshare 8-inch DSI panel overlay

anand.tiwari at oss.qualcomm.com anand.tiwari at oss.qualcomm.com
Wed Oct 21 08:17:28 PDT 2026


From: Shashank Maurya <shashank.maurya at oss.qualcomm.com>

Add a DT overlay to enable Waveshare 8-inch DSI panel connected to
DSI 22pin on the carrier card.

DSI0 from SOC is routed through MUX which can be selected by DIP
switch S1016.5 ON, for enabling this 22pin connector.

Add the JD9365DA-H3 panel, GPIO expander at I2C2 address 0x45 for
panel power, reset and backlight, and the Goodix GT9271 touch
controller.

Disable the default HDMI bridge and connector in favour of the
Waveshare DSI panel.

Signed-off-by: Shashank Maurya <shashank.maurya at oss.qualcomm.com>
Signed-off-by: Anand Tiwari <anand.tiwari at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  5 ++
 .../qcom/talos-lyra-evk-waveshare-dsi-8inch.dtso   | 75 ++++++++++++++++++++++
 2 files changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a2a2ffbbce3a..614152913cbb 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -485,6 +485,11 @@ talos-lyra-evk-raspberrypi-dsi-7inch-dtbs := \
         talos-lyra-evk.dtb talos-lyra-evk-raspberrypi-dsi-7inch.dtbo
 dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-raspberrypi-dsi-7inch.dtb
 dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-raspberrypi-dsi-7inch.dtbo
+
+talos-lyra-evk-waveshare-dsi-8inch-dtbs := \
+        talos-lyra-evk.dtb talos-lyra-evk-waveshare-dsi-8inch.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-waveshare-dsi-8inch.dtb
+dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-waveshare-dsi-8inch.dtbo
 x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
 x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/talos-lyra-evk-waveshare-dsi-8inch.dtso b/arch/arm64/boot/dts/qcom/talos-lyra-evk-waveshare-dsi-8inch.dtso
new file mode 100644
index 000000000000..e9a8fdf0c179
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-lyra-evk-waveshare-dsi-8inch.dtso
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	panel_avdd: regulator-panel-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-avdd";
+		gpios = <&wsgpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel_iovcc: regulator-panel-iovcc {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-iovcc";
+		gpios = <&wsgpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&hdmi_bridge {
+	status = "disabled";
+};
+
+&hdmi_connector {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wsgpio: gpio at 45 {
+		compatible = "waveshare,dsi-touch-gpio";
+		reg = <0x45>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	touchscreen at 5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		reset-gpios = <&wsgpio 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdss_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel at 0 {
+		compatible = "waveshare,8.0-dsi-touch-a", "jadard,jd9365da-h3";
+		reg = <0>;
+
+		reset-gpios = <&wsgpio 1 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&panel_iovcc>;
+		vdd-supply = <&panel_avdd>;
+		backlight = <&wsgpio>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+};

-- 
2.55.0




More information about the linux-arm-kernel mailing list