[PATCH v7 5/5] arm64: dts: amlogic: Add Amlogic S4 Audio
Jerome Brunet
jbrunet at baylibre.com
Wed Oct 21 08:08:09 PDT 2026
> Add basic audio driver support for the Amlogic S4 based
> Amlogic AQ222 board.
>
> Signed-off-by: Jiebing Chen <jiebing.chen at amlogic.com>
> ---
> .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts | 219 +++++++++++++
> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 360 +++++++++++++++++++++
> 2 files changed, 579 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> index 0a3f81ea0fb0..d614dcd6933d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> @@ -75,6 +75,19 @@ vddio_ao1v8: regulator-vddio-ao1v8 {
> regulator-always-on;
> };
>
> + vcc5v_reg: regulator-vcc-5v {
> + compatible = "regulator-fixed";
> + vin-supply = <&main_12v>;
> + regulator-name = "VCC5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio GPIOH_7 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <7000>;
> + enable-active-high;
> + regulator-boot-on;
> + regulator-always-on;
You are adding that for audio and it needs to be always on ?
> + };
> +
> /* SY8120B1ABC DC/DC Regulator. */
> vddcpu: regulator-vddcpu {
> compatible = "pwm-regulator";
> @@ -129,6 +142,212 @@ vddcpu: regulator-vddcpu {
> <699000 98>,
> <689000 100>;
> };
> +
> + dmics: audio-codec-1 {
Unused: nothing references dmics.
> + compatible = "dmic-codec";
> + #sound-dai-cells = <0>;
> + num-channels = <2>;
> + wakeup-delay-ms = <50>;
> + sound-name-prefix = "MIC";
> + };
> +
> + dioo2133: audio-amplifier-0 {
> + compatible = "simple-audio-amplifier";
> + enable-gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
> + VCC-supply = <&vcc5v_reg>;
> + sound-name-prefix = "10U2";
Did you just copy over the u200 file or is it really the component name ?
> + };
> +
> + spdif_dir: audio-spdif-in {
> + compatible = "linux,spdif-dir";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "DIR";
> + };
> +
> + spdif_dit: audio-spdif-out {
> + compatible = "linux,spdif-dit";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "DIT";
> + };
> +
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "aq222";
> + audio-widgets = "Line", "Lineout";
> + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
> + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
> + <&tdmin_lb>, <&dioo2133>;
> + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
> + "TDMOUT_A IN 1", "FRDDR_B OUT 0",
> + "TDMOUT_A IN 2", "FRDDR_C OUT 0",
> + "TDM_A Playback", "TDMOUT_A OUT",
> + "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT",
> + "TDMOUT_C IN 0", "FRDDR_A OUT 2",
> + "TDMOUT_C IN 1", "FRDDR_B OUT 2",
> + "TDMOUT_C IN 2", "FRDDR_C OUT 2",
> + "TDM_C Playback", "TDMOUT_C OUT",
> + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
> + "SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
> + "SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
> + "SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
> + "TDMIN_A IN 0", "TDM_A Capture",
> + "TDMIN_A IN 1", "TDM_B Capture",
> + "TDMIN_A IN 2", "TDM_C Capture",
> + "TDMIN_A IN 3", "TDM_A Loopback",
> + "TDMIN_A IN 4", "TDM_B Loopback",
> + "TDMIN_A IN 5", "TDM_C Loopback",
> + "TDMIN_B IN 0", "TDM_A Capture",
> + "TDMIN_B IN 1", "TDM_B Capture",
> + "TDMIN_B IN 2", "TDM_C Capture",
> + "TDMIN_B IN 3", "TDM_A Loopback",
> + "TDMIN_B IN 4", "TDM_B Loopback",
> + "TDMIN_B IN 5", "TDM_C Loopback",
> + "TDMIN_C IN 0", "TDM_A Capture",
> + "TDMIN_C IN 1", "TDM_B Capture",
> + "TDMIN_C IN 2", "TDM_C Capture",
> + "TDMIN_C IN 3", "TDM_A Loopback",
> + "TDMIN_C IN 4", "TDM_B Loopback",
> + "TDMIN_C IN 5", "TDM_C Loopback",
> + "TDMIN_LB IN 3", "TDM_A Capture",
> + "TDMIN_LB IN 4", "TDM_B Capture",
> + "TDMIN_LB IN 5", "TDM_C Capture",
> + "TDMIN_LB IN 0", "TDM_A Loopback",
> + "TDMIN_LB IN 1", "TDM_B Loopback",
> + "TDMIN_LB IN 2", "TDM_C Loopback",
> + "TODDR_A IN 0", "TDMIN_A OUT",
> + "TODDR_B IN 0", "TDMIN_A OUT",
> + "TODDR_C IN 0", "TDMIN_A OUT",
> + "TODDR_A IN 1", "TDMIN_B OUT",
> + "TODDR_B IN 1", "TDMIN_B OUT",
> + "TODDR_C IN 1", "TDMIN_B OUT",
> + "TODDR_A IN 2", "TDMIN_C OUT",
> + "TODDR_B IN 2", "TDMIN_C OUT",
> + "TODDR_C IN 2", "TDMIN_C OUT",
> + "TODDR_A IN 3", "SPDIFIN Capture",
> + "TODDR_B IN 3", "SPDIFIN Capture",
> + "TODDR_C IN 3", "SPDIFIN Capture",
> + "TODDR_A IN 6", "TDMIN_LB OUT",
> + "TODDR_B IN 6", "TDMIN_LB OUT",
> + "TODDR_C IN 6", "TDMIN_LB OUT",
> + "10U2 INL", "ACODEC LOLP",
> + "10U2 INR", "ACODEC LORP",
> + "Lineout", "10U2 OUTL",
> + "Lineout", "10U2 OUTR";
> + clocks = <&clkc_pll CLKID_HIFI_PLL>,
> + <&clkc_pll CLKID_MPLL0>;
> + assigned-clocks = <&clkc_pll CLKID_HIFI_PLL>,
> + <&clkc_pll CLKID_MPLL0>;
> + assigned-clock-rates = <1179648000>,
> + <270950400>;
2 PLLs only ?
1st appears to be for the 48k family, the 2nd for 44.1k
No 64k support ?
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + dai-link-3 {
> + sound-dai = <&toddr_a>;
> + };
> +
> + dai-link-4 {
> + sound-dai = <&toddr_b>;
> + };
> +
> + dai-link-5 {
> + sound-dai = <&toddr_c>;
> + };
> +
> + dai-link-6 {
> + sound-dai = <&tdmif_a>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + mclk-fs = <256>;
> + codec-0 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
> + };
> + codec-1 {
> + sound-dai = <&toacodec TOACODEC_IN_A>;
> + };
> + };
> +
> + dai-link-7 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + mclk-fs = <256>;
> + codec-0 {
> + sound-dai = <&toacodec TOACODEC_IN_B>;
> + };
> + codec-1 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* 8ch HDMI interface */
> + dai-link-8 {
> + sound-dai = <&tdmif_c>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> + codec-0 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
> + };
> + };
> +
> + /* spdif hdmi and coax output */
No pinctrl on spdifout_a, so the coax output cannot work as is.
> + dai-link-9 {
> + sound-dai = <&spdifout_a>;
> +
> + codec-0 {
> + sound-dai = <&spdif_dit>;
> + };
> +
> + codec-1 {
> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> + };
> + };
> +
> + /* spdif hdmi interface */
> + dai-link-10 {
> + sound-dai = <&spdifout_b>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> + };
> + };
> +
> + /* spdif coax input */
> + dai-link-11 {
> + sound-dai = <&spdifin>;
> +
> + codec {
> + sound-dai = <&spdif_dir>;
> + };
> + };
> +
> + dai-link-12 {
> + sound-dai = <&toacodec TOACODEC_OUT>;
> +
> + codec {
> + sound-dai = <&acodec>;
> + };
> + };
> + };
> };
>
> &pwm_ef {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index 2a6fbd530836..2cf9a8f3f396 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -11,6 +11,11 @@
> #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
> #include <dt-bindings/power/meson-s4-power.h>
> #include <dt-bindings/reset/amlogic,meson-s4-reset.h>
> +#include <dt-bindings/clock/axg-audio-clkc.h>
> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
> +#include <dt-bindings/sound/meson-g12a-toacodec.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> cpus {
> @@ -908,4 +913,359 @@ emmc: mmc at fe08c000 {
> assigned-clock-rates = <24000000>;
> };
> };
> +
> + tdmif_a: audio-controller-0 {
> + compatible = "amlogic,axg-tdm-iface";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "TDM_A";
> + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
> + <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
> + <&clkc_audio AUD_CLKID_MST_A_MCLK>;
> + clock-names = "sclk", "lrclk","mclk";
Should they all be disabled by default ?
> + };
> +
> + tdmif_b: audio-controller-1 {
> + compatible = "amlogic,axg-tdm-iface";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "TDM_B";
> + clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
> + <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
> + <&clkc_audio AUD_CLKID_MST_B_MCLK>;
> + clock-names = "sclk", "lrclk","mclk";
> + };
> +
> + tdmif_c: audio-controller-2 {
> + compatible = "amlogic,axg-tdm-iface";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "TDM_C";
> + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
> + <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
> + <&clkc_audio AUD_CLKID_MST_C_MCLK>;
> + clock-names = "sclk", "lrclk","mclk";
> + };
> +};
> +
> +&apb4 {
> + acodec: audio-controller at 1a000 {
> + compatible = "amlogic,t9015";
> + reg = <0x0 0x1a000 0x0 0x14>;
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "ACODEC";
> + clocks = <&clkc_periphs CLKID_ACODEC>;
> + clock-names = "pclk";
> + resets = <&reset RESET_ACODEC>;
> + AVDD-supply = <&vddio_ao1v8>;
Board-level regulator referenced from the SoC dtsi.
--
Jerome
More information about the linux-arm-kernel
mailing list