[PATCH v2 1/3] dt-bindings: display: bridge: simple: Add data-enable-active to dumb-vga-dac

[Frank Li]

On Mon, Oct 19, 2026 at 07:17:14AM -0300, Leonardo Costa wrote:
> From: Leonardo Costa <leonardo.costa at toradex.com>
>
> Some simple VGA DACs may include a data-enable input that must be driven
> at a specific polarity. Add the data-enable-active property from
> video-interfaces to the input endpoint to describe that polarity.
>
> Signed-off-by: Leonardo Costa <leonardo.costa at toradex.com>
> ---
>  .../bindings/display/bridge/simple-bridge.yaml     | 28 +++++++++++++++++++++-
>  1 file changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> index 7636c24906ba..b1b23d41245d 100644
> --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> @@ -43,9 +43,18 @@ properties:
>
>      properties:
>        port at 0:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
>          description: The bridge input
>
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-enable-active: true
> +

suppose needn't it because unevaluatedProperties: false, which allow all
property in video-interfaces.yaml.

If you only want to enable one property, should be
additionalProperties: false

but I think unevaluatedProperties: false make sense and needn't below if
branch.

Frank

>        port at 1:
>          $ref: /schemas/graph.yaml#/properties/port
>          description: The bridge output
> @@ -65,6 +74,23 @@ required:
>    - compatible
>    - ports
>
> +allOf:
> +  - if:
> +      not:
> +        properties:
> +          compatible:
> +            contains:
> +              const: dumb-vga-dac
> +    then:
> +      properties:
> +        ports:
> +          properties:
> +            port at 0:
> +              properties:
> +                endpoint:
> +                  properties:
> +                    data-enable-active: false
> +
>  additionalProperties: false
>
>  examples:
>
> --
> 2.43.0
>
>