[PATCH 0/5] ARM: dts: Add Colibri iMX6 overlays

[Antoine Gouby]

This series adds device tree overlays for the Colibri iMX6 SoM. The
overlays cover HDMI, VGA and parallel displays.

The series adds support for:

- HDMI Displays
- Toradex Capacitive and Resistive Touch 7" Parallel Displays
- VGA Displays

The Makefile entries build the standalone overlays as DTBOs, and add
ready-to-use composed DTBs for selected carrier boards and accessory
combinations, for build-time coverage.

Signed-off-by: Antoine Gouby <antoine.gouby at toradex.com>
---
Antoine Gouby (5):
      ARM: dts: imx6dl-colibri: Add HDMI overlay
      ARM: dts: imx6dl-colibri: Add Toradex Capacitive Touch Display 7" Parallel
      ARM: dts: imx6dl-colibri: Add Toradex Capacitive Touch Display 7" Parallel with Touch Adapter
      ARM: dts: imx6dl-colibri: Add Toradex Resistive Touch Display 7" Parallel
      ARM: dts: imx6dl-colibri: Add VGA overlay

 arch/arm/boot/dts/nxp/imx/Makefile                 | 85 ++++++++++++++++++++++
 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-hdmi.dtso | 27 +++++++
 ...nel-cap-touch-7inch-parallel-touch-adapter.dtso | 57 +++++++++++++++
 ...6dl-colibri-panel-cap-touch-7inch-parallel.dtso | 38 ++++++++++
 ...6dl-colibri-panel-res-touch-7inch-parallel.dtso | 29 ++++++++
 arch/arm/boot/dts/nxp/imx/imx6dl-colibri-vga.dtso  | 67 +++++++++++++++++
 6 files changed, 303 insertions(+)
---
base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
change-id: 20261019-colibri-imx6-overlays-a5da84ebf127

Best regards,
-- 
Antoine Gouby <antoine.gouby at toradex.com>