[PATCH 0/2] arm64: dts: freescale: add i.MX937 FRDM board support

[Joy Zou]

The i.MX937 is a derivative of the i.MX952 SoC, so it reuses the i.MX952
device tree as its base.

This series adds the DT binding compatible string for the NXP i.MX937
FRDM board and the device tree support for the board.

Compared to the i.MX952, the i.MX937 drops the local dimming and ISP
blocks and runs its Cortex-A55 cores at a lower maximum frequency. The
PCAL6416 GPIO expander is at I2C address 0x21 on i.MX937 FRDM, unlike
0x20 on i.MX952 FRDM.

Signed-off-by: Joy Zou <joy.zou at oss.nxp.com>
---
Joy Zou (2):
      dt-bindings: arm: fsl: add i.MX937 FRDM board
      arm64: dts: freescale: add i.MX937 FRDM board support

 Documentation/devicetree/bindings/arm/fsl.yaml |   7 ++
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx937-frdm.dts  | 111 +++++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx937.dtsi      |  12 +++
 4 files changed, 131 insertions(+)
---
base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
change-id: 20261019-b4-imx937-frdm-84ae3d4b72c1

Best regards,
--  
Joy Zou <joy.zou at oss.nxp.com>