[PATCH net-next 3/5] net: stmmac: dwxgmac2: Add XGMAC 3.01a support

[Maxime Chevallier]

Hi,

On 10/19/26 05:01, Alex Elder wrote:
> From: Daniel Thompson <daniel at riscstar.com>
> 
> XGMAC 2.x and 3.x are architecturally very similar.  That means that
> for everything except one erratum we can simply use the XGMAC 2.x
> callback functions in the stmmac_dma_ops structure.
> 
> Only the set_rx_ring_len callback is specific to XGMAC 3.01.  It
> limits the number of outstanding write requests that can be serviced
> per DMA.
> 
> The other erratum addressed in this patch is simply a comment to
> ensure that a feature that stmmac doesn't currently use is not enabled
> without contemplating the errata.
> 
> Signed-off-by: Daniel Thompson <daniel at riscstar.com>
> Co-developed-by: Alex Elder <elder at riscstar.com>
> Signed-off-by: Alex Elder <elder at riscstar.com>

Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>

Maxime

> ---
>  .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |  3 ++
>  .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    | 52 +++++++++++++++++++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> index f8ab347f7b5b9..0fe86e9942334 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> @@ -374,6 +374,8 @@
>  #define XGMAC_DMA_CH_RxDESC_TAIL_LPTR(x)	(0x0000312c + (0x80 * (x)))
>  #define XGMAC_DMA_CH_TxDESC_RING_LEN(x)		(0x00003130 + (0x80 * (x)))
>  #define XGMAC_DMA_CH_RxDESC_RING_LEN(x)		(0x00003134 + (0x80 * (x)))
> +#define XGMAC_OWRQ			GENMASK(25, 24)
> +#define XGMAC_RDRL			GENMASK(15, 0)
>  #define XGMAC_DMA_CH_INT_EN(x)		(0x00003138 + (0x80 * (x)))
>  #define XGMAC_NIE			BIT(15)
>  #define XGMAC_AIE			BIT(14)
> @@ -465,6 +467,7 @@
>  extern const struct stmmac_ops dwxgmac210_ops;
>  extern const struct stmmac_ops dwxlgmac2_ops;
>  extern const struct stmmac_dma_ops dwxgmac210_dma_ops;
> +extern const struct stmmac_dma_ops dwxgmac301_dma_ops;
>  extern const struct stmmac_desc_ops dwxgmac210_desc_ops;
>  
>  #endif /* __STMMAC_DWXGMAC2_H__ */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> index ff83858ebc1f3..f9a77d641eb65 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> @@ -36,6 +36,13 @@ static void dwxgmac2_dma_init(void __iomem *ioaddr,
>  	 * Route DMA interrupts to per-channel lines when multi-MSI enabled.
>  	 */
>  	if (dma_cfg->multi_msi_en) {
> +		/*
> +		 * A friendly warning to future adventurers. If Descriptor Posted
> +		 * Write support, which is off by default, is ever enabled then be sure
> +		 * to make it optional. This is required by errata for at least XGMAC
> +		 * 3.01A... and the XGMAC 2.x and 3.x are architecturally similar so we
> +		 * use dwxgmac2 support for the 3.x family as well.
> +		 */
>  		value = readl(ioaddr + XGMAC_DMA_MODE);
>  		value = u32_replace_bits(value, XGMAC_INTM_MODE1,
>  					 XGMAC_INTM_MASK);
> @@ -492,6 +499,20 @@ static void dwxgmac2_set_rx_ring_len(struct stmmac_priv *priv,
>  	writel(len, ioaddr + XGMAC_DMA_CH_RxDESC_RING_LEN(chan));
>  }
>  
> +static void dwxgmac301_set_rx_ring_len(struct stmmac_priv *priv,
> +				       void __iomem *ioaddr, u32 len, u32 chan)
> +{
> +	u32 val = FIELD_PREP(XGMAC_RDRL, len);
> +
> +	/*
> +	 * Reduce the number of outstanding write requests to 3 (from default
> +	 * of 4). This is an errata workaround for XGMAC 3.01a.
> +	 */
> +	val |= FIELD_PREP(XGMAC_OWRQ, 3);
> +
> +	writel(val, ioaddr + XGMAC_DMA_CH_RxDESC_RING_LEN(chan));
> +}
> +
>  static void dwxgmac2_set_tx_ring_len(struct stmmac_priv *priv,
>  				     void __iomem *ioaddr, u32 len, u32 chan)
>  {
> @@ -621,3 +642,34 @@ const struct stmmac_dma_ops dwxgmac210_dma_ops = {
>  	.enable_sph = dwxgmac2_enable_sph,
>  	.enable_tbs = dwxgmac2_enable_tbs,
>  };
> +
> +/* All but one field are the same as dwxgmac210_dma_ops */
> +const struct stmmac_dma_ops dwxgmac301_dma_ops = {
> +	.reset = dwxgmac2_dma_reset,
> +	.init = dwxgmac2_dma_init,
> +	.init_chan = dwxgmac2_dma_init_chan,
> +	.init_rx_chan = dwxgmac2_dma_init_rx_chan,
> +	.init_tx_chan = dwxgmac2_dma_init_tx_chan,
> +	.axi = dwxgmac2_dma_axi,
> +	.dump_regs = dwxgmac2_dma_dump_regs,
> +	.dma_rx_mode = dwxgmac2_dma_rx_mode,
> +	.dma_tx_mode = dwxgmac2_dma_tx_mode,
> +	.enable_dma_irq = dwxgmac2_enable_dma_irq,
> +	.disable_dma_irq = dwxgmac2_disable_dma_irq,
> +	.start_tx = dwxgmac2_dma_start_tx,
> +	.stop_tx = dwxgmac2_dma_stop_tx,
> +	.start_rx = dwxgmac2_dma_start_rx,
> +	.stop_rx = dwxgmac2_dma_stop_rx,
> +	.dma_interrupt = dwxgmac2_dma_interrupt,
> +	.get_hw_feature = dwxgmac2_get_hw_feature,
> +	.rx_watchdog = dwxgmac2_rx_watchdog,
> +	.set_rx_ring_len = dwxgmac301_set_rx_ring_len,	/* Only 3.01 */
> +	.set_tx_ring_len = dwxgmac2_set_tx_ring_len,
> +	.set_rx_tail_ptr = dwxgmac2_set_rx_tail_ptr,
> +	.set_tx_tail_ptr = dwxgmac2_set_tx_tail_ptr,
> +	.enable_tso = dwxgmac2_enable_tso,
> +	.qmode = dwxgmac2_qmode,
> +	.set_bfsize = dwxgmac2_set_bfsize,
> +	.enable_sph = dwxgmac2_enable_sph,
> +	.enable_tbs = dwxgmac2_enable_tbs,
> +};