[net-next,PATCH 2/2] enetc: Make eMDIO MDC rate configurable from DT

[Marek Vasut]

On 10/16/26 10:04 PM, Frank Li wrote:

[...]

>> +int enetc_mdio_update_mdc_div(struct mii_bus *bus)
>> +{
>> +	struct enetc_mdio_priv *mdio_priv = bus->priv;
>> +	struct device *dev = bus->parent;
>> +	struct clk *enet_clk;
>> +	u32 div, mdc_freq;
>> +
>> +	if (device_property_read_u32(dev, "clock-frequency", &mdc_freq))
>> +		return 0;
>> +
>> +	enet_clk = devm_clk_get(dev, NULL);
>> +	if (IS_ERR(enet_clk))
>> +		return dev_err_probe(dev, PTR_ERR(enet_clk),
>> +				     "Input clock unknown, not changing MDC frequency\n");
> 
> binding said clock is optional. If return failure here, it will block
> existing dts, which have not clock property.
> 
> should be devm_clk_get_optional()?
Existing DTs are fine, since they don't define clock-frequency property. 
And whoever wants to define clock-frequency property, they also must 
provide clock property.