[PATCH v5 1/2] dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY

[Rob Herring]

On Wed, Sep 02, 2026 at 04:13:02PM +0200, Marek Vasut wrote:
> From: Pankaj Dev <pankaj.dev at st.com>
> 
> Document USB2 PHY for STM32MP25 USB2 controllers, which includes the
> USB2.0 host-only controller and USB 2.0 part of the DWC3 controller.
> Two such PHYs in total are present in STM32MP25 SoC, they both are
> slightly different, therefore they use different compatible string
> to discern them.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
> Signed-off-by: Pankaj Dev <pankaj.dev at st.com>
> Co-developed-by: Rahul Kumar <rahul.kumar05 at st.com>
> Signed-off-by: Rahul Kumar <rahul.kumar05 at st.com>
> Co-developed-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> Co-developed-by: Clément Le Goffic <clement.legoffic at foss.st.com>
> Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
> Co-developed-by: Marek Vasut <marex at nabladev.com>
> Signed-off-by: Marek Vasut <marex at nabladev.com>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: Christian Bruel <christian.bruel at foss.st.com>
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
> Cc: Manivannan Sadhasivam <mani at kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Pankaj Dev <pankaj.dev at st.com>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Rahul Kumar <rahul.kumar05 at st.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Rosen Penev <rosenp at gmail.com>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: kernel at dh-electronics.com
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-phy at lists.infradead.org
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> ---
> V2: - Fix up Sob/Cdb lines
>     - Fix up compatible string in example
>     - Use additionalProperties: false
>     - Expand description:
>     - Use clock-cells = <1> to discern OSC and future PLL clock from the PHY
> V3: - Move clock-cells next to PHY cells
>     - Fix the bindings
>     - Fix up Sob/Cdb lines further
> V4: - Reorder the properties: list, put #...cells at the end, reg after compatible
>     - Split this from series arm64: dts: phy: st: usb: Add STM32MP2 USB support
>       https://lore.kernel.org/all/20260822074816.548662-1-marex@nabladev.com/
> V5: Add RB from Krzysztof
> ---
>  .../bindings/phy/st,stm32-usb2phy.yaml        | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-usb2phy.yaml

Applied because the schema depending on this one is already applied.

Rob