[PATCH v2 2/5] arm64: dts: imx8qxp: Add display controller subsystem

[Frank Li]

On Thu, Oct 15, 2026 at 11:41:54AM +0800, Liu Ying wrote:
> Hi Alexander,
>
> On Wed, Oct 14, 2026 at 09:16:46AM +0200, Alexander Stein wrote:
>
> [...]
>
...
> > +
> > +			dc0_framegen1: framegen at 5618d400 {
> > +				reg = <0x5618d400 0x98>;
> > +				clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_1>;
> > +				interrupt-parent = <&dc0_intc>;
> > +				interrupts = <28>, <29>, <30>, <31>,
> > +					     <45>, <46>, <47>, <48>;
> > +				interrupt-names = "int0", "int1", "int2", "int3",
> > +						  "primsync_on", "primsync_off",
> > +						  "secsync_on", "secsync_off";
> > +			};
> > +
> > +			dc0_tcon1: tcon at 5618e400 {
> > +				reg = <0x5618e400 0x588>;
> > +
> > +				port {
> > +					dc0_disp1_dc0_pixel_combiner_ch1: endpoint {
> > +						remote-endpoint = <&dc0_pixel_combiner_ch1_dc0_disp1>;
> > +					};
> > +				};
> > +			};
> > +		};
> > +	};
>
> I'm thinking that it would be good to have a complete display controller
> DT node in the first place, including those prefetch engines attached to
> fetchunits through the fsl,prg property.

what's current prefetch engines status? Is it possible merge at v7.5 ?

Frank

>  In this way, display controller
> driver's life would be easier - all child/grandchild devices are always
> available.  I'm considering to adding a check to the Linux display controller
> driver to ensure the availability(at least for critical child/grandchild
> devices).
>
> --
> Regards,
> Liu Ying
>