[PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller

[Navid Ghahremani]

Add Device Tree binding for the DesignWare PCIe host controller on the
ZTE ZX279128S SoC, using standard clocks, resets, and phys properties.

Signed-off-by: Navid Ghahremani <ghahramani.navid at gmail.com>
---
 .../bindings/pci/zte,zx279128s-pcie.yaml      | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/zte,zx279128s-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/zte,zx279128s-pcie.yaml b/Documentation/devicetree/bindings/pci/zte,zx279128s-pcie.yaml
new file mode 100644
index 0000000000..dc0214511f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/zte,zx279128s-pcie.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/zte,zx279128s-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZTE zx279128s PCIe host controller
+
+maintainers:
+  - Navid Ghahremani <ghahramani.navid at gmail.com>
+
+description:
+  The ZTE zx279128s has two PCIe host controllers based on the Synopsys
+  DesignWare PCIe IP, each with one lane. Their clocks, resets and PHYs are
+  controlled through the SoC's Top CRM blocks.
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: zte,zx279128s-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Controller wrapper registers
+      - description: PCIe configuration space region
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: ctrl
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe controller clock
+
+  clock-names:
+    items:
+      - const: pcie
+
+  resets:
+    items:
+      - description: PCIe controller reset
+
+  reset-names:
+    items:
+      - const: core
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie
+
+  reset-gpios:
+    maxItems: 1
+    description: Optional board GPIO reset line for downstream endpoints.
+
+  enable-gpios:
+    maxItems: 1
+    description: Optional second board GPIO enable line driven together with reset-gpios.
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/zte,zx279128s-crm.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/zte,zx279128s-reset.h>
+
+    pcie at f000000 {
+        compatible = "zte,zx279128s-pcie";
+        reg = <0x0f000000 0x4000>,
+              <0x09500000 0x1000>,
+              <0x1c000000 0x200000>;
+        reg-names = "dbi", "ctrl", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        bus-range = <0x00 0xff>;
+        ranges = <0x82000000 0 0x10000000 0x10000000 0 0x08000000>;
+        interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &gic GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &gic GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &gic GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &gic GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+        linux,pci-domain = <0>;
+        clocks = <&crm2 ZX279128S_CRM2_PCIE0_CLK>;
+        clock-names = "pcie";
+        resets = <&crm2 ZX279128S_CRM2_RESET_PCIE0>;
+        reset-names = "core";
+        phys = <&pcie0_phy>;
+        phy-names = "pcie";
+        reset-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+        enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+    };
-- 
2.55.0