[PATCH v10 3/4] arm64: dts: imx8mp-skov-revc: convert to overlays

[Steffen Trumtrar]

Hi,

On 2026-10-13 at 09:31 +02, Krzysztof Kozlowski <krzk at kernel.org> wrote:

> On Mon, Oct 12, 2026 at 08:30:32AM +0200, Steffen Trumtrar wrote:
> > The i.MX8MP Skov RevC jutouch 10" and Tian 7" variants are pretty
> > similar, apart from the Display and touch controller.
> > 
> > Move the common bindings to imx8mp-skov-revc-touch.dts and convert both
> > variants to use overlays applied on this base version.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > ---
> >  arch/arm64/boot/dts/freescale/Makefile             |  5 ++
> >  .../imx8mp-skov-revc-jutouch-jt101tm023.dtso       | 38 ++++++++++
> >  .../dts/freescale/imx8mp-skov-revc-tian-g07017.dts | 81 ----------------------
> >  .../freescale/imx8mp-skov-revc-tian-g07017.dtso    | 40 +++++++++++
> >  ...h-jt101tm023.dts => imx8mp-skov-revc-touch.dts} | 26 +++----
> >  5 files changed, 91 insertions(+), 99 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > index 475e1ad9116e1..7c1b61249778e 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -707,6 +707,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb
> > +
> > +imx8mp-skov-revc-jutouch-jt101tm023-dtbs += imx8mp-skov-revc-touch.dtb \
> > +	imx8mp-skov-revc-jutouch-jt101tm023.dtbo
> > +imx8mp-skov-revc-tian-g07017-dtbs += imx8mp-skov-revc-touch.dtb \
> > +	imx8mp-skov-revc-tian-g07017.dtbo
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
> > diff --git
> > a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso
> > b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso
> > new file mode 100644
> > index 0000000000000..33ddd08a7adb5
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso
> 
> I do not understand this. This is a board, so not an overlay.

yes, that's what I did up until v4. New board with new dts.

- Link to v4: https://patch.msgid.link/20260706-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v4-0-dfc0c8827c02@pengutronix.de

The boards are all very similar apart from the touch panel, but they are all "real" boards and don't share a SOM, so dtsi is also not correct.


Best regards,
Steffen

> > @@ -0,0 +1,38 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +&{/} {
> > +	model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023";
> > +	compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp";
> 
> Best regards,
> Krzysztof

-- 
Pengutronix e.K.                | Dipl.-Inform. Steffen Trumtrar |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |