[PATCH v2 7/9] arm64: dts: imx93-kontron: Fix ETH_B_TXD GPIO labels

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

The labels for the ETH_B transmit data pads are off by one.
ENET1_TD3..TD0 map to GPIO4_IO02..05, which are the OSM-S pads
ETH_B_TXD3..TXD0. There is no ETH_B_TXD4 pad. Fix the labels.

Fixes: 2b52fd6035b7 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
index 36548d9181695..a6b6128f22ddf 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -83,8 +83,8 @@ &gpio3 {
 &gpio4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio4>;
-	gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3",
-			  "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+	gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+			  "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
 			  "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
 			  "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO",
 			  "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0",

-- 
2.55.0