[PATCH v11 2/4] dt-bindings: arm: fsl: add compatibles for Skov i.MX8MP boards

[Steffen Trumtrar]

Add a compatible for all revC-based Skov boards with a touch panel.

Also, in preparation for adding a new device tree variant with a
different 7" panel than the already mainline ones, also describe that DT
compatible in the binding.

Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index cb99fb74805bc..3ff8cd69b0830 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1153,8 +1153,10 @@ properties:
               - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
               - skov,imx8mp-skov-revc-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
+              - skov,imx8mp-skov-revc-jutouch-jt070tm041 # SKOV i.MX8MP climate control with 7" JuTouch panel
               - skov,imx8mp-skov-revc-jutouch-jt101tm023 # SKOV i.MX8MP climate control with 10" JuTouch panel
               - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
+              - skov,imx8mp-skov-revc-touch # SKOV i.MX8MP climate control revision C with touch panel
               - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board
               - ysoft,imx8mp-iota2-lumpy  # Y Soft i.MX8MP IOTA2 Lumpy Board
           - const: fsl,imx8mp

-- 
2.51.0