[PATCH 3/3] ARM: dts: imx6q-apalis: Add VGA overlay

[Frank Li]

On Mon, Oct 12, 2026 at 04:25:25AM -0300, Leonardo Costa wrote:
> From: Leonardo Costa <leonardo.costa at toradex.com>
>
> Add a device tree overlay for the VGA output available on the Apalis
> Evaluation Board, which is driven from a parallel RGB interface passing
> through a non-programmable video DAC to a VGA connector, without VESA
> DDC I2C signals.
>
> The overlay is also combined with the various Apalis Evaluation Board
> device trees to provide ready-to-use DTBs.
>
> Signed-off-by: Leonardo Costa <leonardo.costa at toradex.com>
> ---
>  arch/arm/boot/dts/nxp/imx/Makefile                 | 21 ++++++
>  .../boot/dts/nxp/imx/imx6q-apalis-eval-vga.dtso    | 79 ++++++++++++++++++++++
>  2 files changed, 100 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index c5caca92ea10..b5ad9172e1f4 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -59,6 +59,22 @@ dtb-$(CONFIG_SOC_IMX53) += \
>  imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo
>  imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo
>
> +imx6q-apalis-eval-v1.2-vga-dtbs := \
> +	imx6q-apalis-eval-v1.2.dtb \
> +	imx6q-apalis-eval-vga.dtbo
> +
> +imx6q-apalis-eval-vga-dtbs := \
> +	imx6q-apalis-eval.dtb \
> +	imx6q-apalis-eval-vga.dtbo
> +
> +imx6q-apalis-v1.2-eval-v1.2-vga-dtbs := \
> +	imx6q-apalis-v1.2-eval-v1.2.dtb \
> +	imx6q-apalis-eval-vga.dtbo
> +
> +imx6q-apalis-v1.2-eval-vga-dtbs := \
> +	imx6q-apalis-v1.2-eval.dtb \
> +	imx6q-apalis-eval-vga.dtbo
> +

Thank you using one overlay cover difference boards

Frank