[PATCH 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch

[Navid Ghahremani]

Describe the switch, receive interrupt and per-port PHY modes and MAC
addresses.

Assisted-by: LLM
Signed-off-by: Navid Ghahremani <ghahramani.navid at gmail.com>
---
 .../bindings/net/zte,zx279128s-gmac.yaml      | 108 ++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml

diff --git a/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml b/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
new file mode 100644
index 0000000000..56c81aa6e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/zte,zx279128s-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZTE zx279128s Ethernet switch
+
+maintainers:
+  - Navid Ghahremani <ghahramani.navid at gmail.com>
+
+description:
+  The ZTE zx279128s has a five-port gigabit Ethernet switch with a traffic
+  manager, a buffer manager and a DMA engine that connects it to the CPU.
+  Each port is described by a child node of ethernet-ports and becomes its
+  own network interface, with the MAC address given in that node.
+
+properties:
+  compatible:
+    const: zte,zx279128s-gmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: The traffic manager's interrupt, which signals frames
+      received for the CPU.
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-4]$":
+        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Switch port number
+            maximum: 4
+
+          label: true
+
+          phy-handle: true
+
+          phy-mode:
+            description: internal for the SoC's own PHYs of ports 0-3, gmii
+              for an external PHY.
+            enum: [gmii, internal]
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet at 92000000 {
+        compatible = "zte,zx279128s-gmac";
+        reg = <0x92000000 0x400000>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port at 0 {
+                reg = <0>;
+                label = "lan1";
+                phy-handle = <&phy10>;
+                phy-mode = "internal";
+                nvmem-cells = <&macaddr 0>;
+                nvmem-cell-names = "mac-address";
+            };
+
+            port at 4 {
+                reg = <4>;
+                label = "wan";
+                phy-handle = <&phy8>;
+                phy-mode = "gmii";
+                nvmem-cells = <&macaddr 1>;
+                nvmem-cell-names = "mac-address";
+            };
+        };
+    };
-- 
2.55.0