[PATCH v4 06/10] gpio: mxc: convert probe error handling to devres

Frank Li Frank.li at oss.nxp.com
Thu Oct 8 13:12:43 PDT 2026


On Wed, Oct 07, 2026 at 06:44:21PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> Replace irq_domain_create_legacy() with devm_irq_domain_instantiate()
> and the open-coded pm_runtime_set_active() + pm_runtime_enable() pair
> with devm_pm_runtime_set_active_enabled(), converting the remaining
> manually-unwound resources in probe to devres management.
>
> With every allocation after the PM block now devm-managed, the
> out_irqdomain_remove and out_bgio error-path labels are eliminated
> entirely - probe errors simply return directly.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/gpio/gpio-mxc.c | 49 +++++++++++++++++++++++++------------------------
>  1 file changed, 25 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 5da603569d88..54b09f1a4b50 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -449,6 +449,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  {
>  	struct gpio_generic_chip_config config = { };
>  	struct device_node *np = pdev->dev.of_node;
> +	struct irq_domain_info d_info;
>  	struct mxc_gpio_port *port;
>  	int irq_count;
>  	int irq_base;
> @@ -484,9 +485,13 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	if (IS_ERR(port->clk))
>  		return PTR_ERR(port->clk);
>
> -	pm_runtime_get_noresume(&pdev->dev);
> -	pm_runtime_set_active(&pdev->dev);
> -	pm_runtime_enable(&pdev->dev);
> +	err = devm_pm_runtime_get_noresume(&pdev->dev);
> +	if (err)
> +		return dev_err_probe(&pdev->dev, err, "Failed to get PM runtime\n");

look like needn't call devm_pm_runtime_Get_noresume() to pump ref count.

Frank

> +
> +	err = devm_pm_runtime_set_active_enabled(&pdev->dev);
> +	if (err)
> +		return dev_err_probe(&pdev->dev, err, "Failed to enable PM runtime\n");
>
>  	/* disable the interrupt and clear the status */
>  	writel(0, port->base + GPIO_IMR);
> @@ -512,7 +517,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = gpio_generic_chip_init(&port->gen_gc, &config);
>  	if (err)
> -		goto out_bgio;
> +		return err;
>
>  	port->gen_gc.gc.request = mxc_gpio_request;
>  	port->gen_gc.gc.free = mxc_gpio_free;
> @@ -528,27 +533,31 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port);
>  	if (err)
> -		goto out_bgio;
> +		return err;
>
>  	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
> -	if (irq_base < 0) {
> -		err = irq_base;
> -		goto out_bgio;
> -	}
> +	if (irq_base < 0)
> +		return irq_base;
> +
> +	d_info = (struct irq_domain_info) {
> +		.fwnode		= dev_fwnode(&pdev->dev),
> +		.size		= 32,
> +		.hwirq_max	= 32,
> +		.virq_base	= irq_base,
> +		.ops		= &irq_domain_simple_ops,
> +		.dev		= &pdev->dev,
> +	};
>
> -	port->domain = irq_domain_create_legacy(dev_fwnode(&pdev->dev), 32, irq_base, 0,
> -						&irq_domain_simple_ops, NULL);
> -	if (!port->domain) {
> -		err = -ENODEV;
> -		goto out_bgio;
> -	}
> +	port->domain = devm_irq_domain_instantiate(&pdev->dev, &d_info);
> +	if (IS_ERR(port->domain))
> +		return PTR_ERR(port->domain);
>
>  	irq_domain_set_pm_device(port->domain, &pdev->dev);
>
>  	/* gpio-mxc can be a generic irq chip */
>  	err = mxc_gpio_init_gc(port, irq_base);
>  	if (err < 0)
> -		goto out_irqdomain_remove;
> +		return err;
>
>  	list_add_tail(&port->node, &mxc_gpio_ports);
>
> @@ -558,14 +567,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	pm_runtime_put_autosuspend(&pdev->dev);
>
>  	return 0;
> -
> -out_irqdomain_remove:
> -	irq_domain_remove(port->domain);
> -out_bgio:
> -	pm_runtime_disable(&pdev->dev);
> -	pm_runtime_put_noidle(&pdev->dev);
> -	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
> -	return err;
>  }
>
>  static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
>
> --
> 2.51.0
>
>



More information about the linux-arm-kernel mailing list