[PATCH v2 1/3] arm64: dts: imx8mm-tqma8mqml: restrict clock for SPI-NOR flash

[Alexander Stein]

Hi,

Am Donnerstag, 8. Oktober 2026, 10:34:27 Mitteleuropäische Sommerzeit schrieb Bough Chen:
> On Wed, Oct 07, 2026 at 09:20:13AM +0200, Alexander Stein wrote:
> > From: Markus Niebel <Markus.Niebel at ew.tq-group.com>
> > 
> > The FlexSPI controller uses quad SPI with internal clock recovery.
> > The i.MX 8M Mini Applications Processor Datasheet for Industrial Products,
> > Rev. 2, 11/2022 lists a maximum FlexSPI frequency of 66.666666 MHz for
> > that mode.
> > 
> > Fixes: dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM")
> 
> There is already one patch to limit the clock rate based on SoCs, refer to:
> https://patch.msgid.link/20260728-fspi-clock-v2-1-dbe786a4a6eb@nxp.com

Ah, thanks. I wasn't aware of that. Despite that I don't like this just
supports RXCLKSRC 0 and 3 (SDR/DTR), this in deed limits the frequency
already.

> I think the max frequency in the DTS flash node should describe only the
> SPI NOR device limitation, not the host limitation.

True, before there was no limitation like that. But starting with commit
f43579ef35005 ("spi: spi-nxp-fspi: limit the clock rate for different
sample clock source selection") this series is no longer necessary.

Thanks and best regards
Alexander

> Regards
> Haibo Chen
> > Signed-off-by: Markus Niebel <Markus.Niebel at ew.tq-group.com>
> > Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> > ---
> > Changes in v2:
> > * Clarify which datasheet is referred to
> > * Add Fixes tag
> > 
> >  arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> > index 1b5ba3c47164f..48285bcbe9bbb 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> > @@ -60,7 +60,7 @@ &flexspi {
> >  	flash0: flash at 0 {
> >  		compatible = "jedec,spi-nor";
> >  		reg = <0>;
> > -		spi-max-frequency = <84000000>;
> > +		spi-max-frequency = <66666666>;
> >  		spi-tx-bus-width = <1>;
> >  		spi-rx-bus-width = <4>;
> >  		vcc-supply = <&buck5_reg>;
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/