[PATCH v6 4/9] irqchip/imx-irqsteer: Convert to devm_pm_runtime_set_active_enabled()

[Zhipeng.wang_1 at oss.nxp.com]

From: Zhipeng Wang <zhipeng.wang_1 at nxp.com>

imx_irqsteer_probe() enables runtime PM with pm_runtime_enable(), but
imx_irqsteer_remove() never disables it. Runtime PM therefore stays
enabled after the device is unbound, and rebinding it triggers:

  Unbalanced pm_runtime_enable!

Use devm_pm_runtime_set_active_enabled() so the driver core marks the
device active (matching the enabled clock) and disables runtime PM again
on unbind, keeping the enable balanced across unbind/rebind.

This becomes reachable once the driver can be unbound and reloaded, but
the imbalance already exists today on unbind, so fix it separately with
a Fixes tag for stable.

Fixes: 4730d2233311 ("irqchip/imx-irqsteer: Add runtime PM support")
Suggested-by: Fabio Estevam <festevam at nabladev.com>
Signed-off-by: Zhipeng Wang <zhipeng.wang_1 at nxp.com>
---
 drivers/irqchip/irq-imx-irqsteer.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index d05de3d26fb2..5acc04504e52 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -239,6 +239,10 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 	if (irqsteer_has_chanctrl(data->devtype_data))
 		writel_relaxed(BIT(data->channel), data->regs + CHANCTRL);
 
+	ret = devm_pm_runtime_set_active_enabled(&pdev->dev);
+	if (ret)
+		goto out;
+
 	data->domain = irq_domain_create_linear(dev_fwnode(&pdev->dev), data->reg_num * 32,
 						&imx_irqsteer_domain_ops, data);
 	if (!data->domain) {
@@ -260,9 +264,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 out:
 	clk_disable_unprepare(data->ipg_clk);
@@ -285,7 +286,8 @@ static void imx_irqsteer_remove(struct platform_device *pdev)
 
 	irq_domain_remove(irqsteer_data->domain);
 
-	clk_disable_unprepare(irqsteer_data->ipg_clk);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		clk_disable_unprepare(irqsteer_data->ipg_clk);
 }
 
 #ifdef CONFIG_PM
-- 
2.34.1