[PATCH v2 06/17] ARM: dts: samsung: exynos4210: add or remove empty lines

[Henrik Grimler]

For better readability it is preferred to have an empty line before
the status property, as well as before every child node. Empty lines
do not really help at start of children nodes though. Add or remove
empty lines where applicable.

dt-check-style in strict mode reports the issues like:

  samsung/exynos4210.dtsi:36: [required-blank-lines] "status" must be preceded by a blank line
  samsung/exynos4210.dtsi:45: [required-blank-lines] child node must be preceded by a blank line

Fixed partially with the help of dtfmt (Devicetree Source formatter).

Signed-off-by: Henrik Grimler <henrik.grimler at axis.com>
---
 arch/arm/boot/dts/samsung/exynos4210.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/samsung/exynos4210.dtsi b/arch/arm/boot/dts/samsung/exynos4210.dtsi
index 66b1a55f703d..66f35c4ae6b1 100644
--- a/arch/arm/boot/dts/samsung/exynos4210.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4210.dtsi
@@ -33,6 +33,7 @@ bus_acp: bus-acp {
 		clocks = <&clock CLK_DIV_ACP>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_acp_opp_table>;
+
 		status = "disabled";
 
 		bus_acp_opp_table: opp-table {
@@ -42,9 +43,11 @@ bus_acp_opp_table: opp-table {
 			opp-134000000 {
 				opp-hz = /bits/ 64 <134000000>;
 			};
+
 			opp-160000000 {
 				opp-hz = /bits/ 64 <160000000>;
 			};
+
 			opp-200000000 {
 				opp-hz = /bits/ 64 <200000000>;
 			};
@@ -56,6 +59,7 @@ bus_display: bus-display {
 		clocks = <&clock CLK_ACLK160>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_display_opp_table>;
+
 		status = "disabled";
 
 		bus_display_opp_table: opp-table {
@@ -65,9 +69,11 @@ bus_display_opp_table: opp-table {
 			opp-100000000 {
 				opp-hz = /bits/ 64 <100000000>;
 			};
+
 			opp-134000000 {
 				opp-hz = /bits/ 64 <134000000>;
 			};
+
 			opp-160000000 {
 				opp-hz = /bits/ 64 <160000000>;
 			};
@@ -79,6 +85,7 @@ bus_dmc: bus-dmc {
 		clocks = <&clock CLK_DIV_DMC>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_dmc_opp_table>;
+
 		status = "disabled";
 
 		bus_dmc_opp_table: opp-table {
@@ -89,10 +96,12 @@ opp-134000000 {
 				opp-hz = /bits/ 64 <134000000>;
 				opp-microvolt = <1025000>;
 			};
+
 			opp-267000000 {
 				opp-hz = /bits/ 64 <267000000>;
 				opp-microvolt = <1050000>;
 			};
+
 			opp-400000000 {
 				opp-hz = /bits/ 64 <400000000>;
 				opp-microvolt = <1150000>;
@@ -106,6 +115,7 @@ bus_fsys: bus-fsys {
 		clocks = <&clock CLK_ACLK133>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_fsys_opp_table>;
+
 		status = "disabled";
 
 		bus_fsys_opp_table: opp-table {
@@ -115,6 +125,7 @@ bus_fsys_opp_table: opp-table {
 			opp-10000000 {
 				opp-hz = /bits/ 64 <10000000>;
 			};
+
 			opp-134000000 {
 				opp-hz = /bits/ 64 <134000000>;
 			};
@@ -126,6 +137,7 @@ bus_lcd0: bus-lcd0 {
 		clocks = <&clock CLK_ACLK200>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_leftbus_opp_table>;
+
 		status = "disabled";
 	};
 
@@ -134,6 +146,7 @@ bus_leftbus: bus-leftbus {
 		clocks = <&clock CLK_DIV_GDL>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_leftbus_opp_table>;
+
 		status = "disabled";
 	};
 
@@ -142,6 +155,7 @@ bus_mfc: bus-mfc {
 		clocks = <&clock CLK_SCLK_MFC>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_leftbus_opp_table>;
+
 		status = "disabled";
 	};
 
@@ -150,6 +164,7 @@ bus_peri: bus-peri {
 		clocks = <&clock CLK_ACLK100>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_peri_opp_table>;
+
 		status = "disabled";
 
 		bus_peri_opp_table: opp-table {
@@ -159,6 +174,7 @@ bus_peri_opp_table: opp-table {
 			opp-5000000 {
 				opp-hz = /bits/ 64 <5000000>;
 			};
+
 			opp-100000000 {
 				opp-hz = /bits/ 64 <100000000>;
 			};
@@ -170,6 +186,7 @@ bus_rightbus: bus-rightbus {
 		clocks = <&clock CLK_DIV_GDR>;
 		clock-names = "bus";
 		operating-points-v2 = <&bus_leftbus_opp_table>;
+
 		status = "disabled";
 	};
 
@@ -182,6 +199,7 @@ cluster0 {
 				core0 {
 					cpu = <&cpu0>;
 				};
+
 				core1 {
 					cpu = <&cpu1>;
 				};
@@ -234,9 +252,11 @@ bus_leftbus_opp_table: opp-table-0 {
 		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
+
 		opp-160000000 {
 			opp-hz = /bits/ 64 <160000000>;
 		};
+
 		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-suspend;
@@ -353,6 +373,7 @@ ppmu_lcd1: ppmu at 12240000 {
 			reg = <0x12240000 0x2000>;
 			clocks = <&clock CLK_PPMULCD1>;
 			clock-names = "ppmu";
+
 			status = "disabled";
 		};
 
@@ -489,6 +510,7 @@ opp-160000000 {
 			opp-hz = /bits/ 64 <160000000>;
 			opp-microvolt = <950000>;
 		};
+
 		opp-267000000 {
 			opp-hz = /bits/ 64 <267000000>;
 			opp-microvolt = <1050000>;
@@ -511,6 +533,7 @@ &mixer {
 &pmu {
 	interrupts = <2 2>, <3 2>;
 	interrupt-affinity = <&cpu0>, <&cpu1>;
+
 	status = "okay";
 };
 

-- 
2.43.0