[PATCH 03/17] ARM: dts: samsung: exynos4: sort all properties
Henrik Grimler
henrik.grimler at axis.com
Sun Oct 4 13:16:00 PDT 2026
Fixes dt-check-style in strict mode property-order warnings like:
samsung/exynos4.dtsi:226: [property-order] property 'iommus' out of canonical order (should sort before 'samsung,sysreg')
Signed-off-by: Henrik Grimler <henrik.grimler at axis.com>
---
arch/arm/boot/dts/samsung/exynos4.dtsi | 89 +++++++++++++++++-----------------
1 file changed, 45 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/samsung/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi
index f69b01423ae0..43cbbedbfe41 100644
--- a/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -60,9 +60,9 @@ pmu: pmu {
soc: soc {
compatible = "simple-bus";
+ ranges;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
clock_audss: clock-controller at 3810000 {
compatible = "samsung,exynos4210-audss-clock";
@@ -86,8 +86,8 @@ i2s0: i2s at 3830000 {
clock-output-names = "i2s_cdclk0";
dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
dma-names = "tx", "rx", "tx-sec";
- samsung,idma-addr = <0x03000000>;
#sound-dai-cells = <1>;
+ samsung,idma-addr = <0x03000000>;
status = "disabled";
};
@@ -159,16 +159,16 @@ pd_gps_alive: power-domain at 10023d00 {
gic: interrupt-controller at 10490000 {
compatible = "arm,cortex-a9-gic";
+ reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
};
combiner: interrupt-controller at 10440000 {
compatible = "samsung,exynos4210-combiner";
+ reg = <0x10440000 0x1000>;
#interrupt-cells = <2>;
interrupt-controller;
- reg = <0x10440000 0x1000>;
};
sys_reg: syscon at 10010000 {
@@ -198,22 +198,23 @@ dsi_0: dsi at 11c80000 {
phy-names = "dsim";
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
clock-names = "bus_clk", "sclk_mipi";
-
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+
+ status = "disabled";
};
camera: camera at 11800000 {
compatible = "samsung,fimc";
ranges = <0x0 0x11800000 0xa0000>;
- status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
#clock-cells = <1>;
clock-output-names = "cam_a_clkout", "cam_b_clkout";
+ status = "disabled";
+
fimc_0: fimc at 0 {
compatible = "samsung,exynos4210-fimc";
reg = <0x0 0x1000>;
@@ -221,9 +222,9 @@ fimc_0: fimc at 0 {
clocks = <&clock CLK_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
+ iommus = <&sysmmu_fimc0>;
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
- iommus = <&sysmmu_fimc0>;
status = "disabled";
};
@@ -235,9 +236,9 @@ fimc_1: fimc at 10000 {
clocks = <&clock CLK_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
+ iommus = <&sysmmu_fimc1>;
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
- iommus = <&sysmmu_fimc1>;
status = "disabled";
};
@@ -249,9 +250,9 @@ fimc_2: fimc at 20000 {
clocks = <&clock CLK_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
+ iommus = <&sysmmu_fimc2>;
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
- iommus = <&sysmmu_fimc2>;
status = "disabled";
};
@@ -263,9 +264,9 @@ fimc_3: fimc at 30000 {
clocks = <&clock CLK_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
+ iommus = <&sysmmu_fimc3>;
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
- iommus = <&sysmmu_fimc3>;
status = "disabled";
};
@@ -281,10 +282,10 @@ csis_0: csis at 80000 {
power-domains = <&pd_cam>;
phys = <&mipi_phy 0>;
phy-names = "csis";
-
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+
+ status = "disabled";
};
csis_1: csis at 90000 {
@@ -298,10 +299,10 @@ csis_1: csis at 90000 {
power-domains = <&pd_cam>;
phys = <&mipi_phy 2>;
phy-names = "csis";
-
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+
+ status = "disabled";
};
};
@@ -370,10 +371,10 @@ sdhci_3: mmc at 12540000 {
exynos_usbphy: usb-phy at 125b0000 {
compatible = "samsung,exynos4210-usb2-phy";
reg = <0x125b0000 0x100>;
- samsung,pmureg-phandle = <&pmu_system_controller>;
clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
clock-names = "phy", "ref";
#phy-cells = <1>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
status = "disabled";
};
@@ -396,10 +397,10 @@ ehci: usb at 12580000 {
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
-
- status = "disabled";
phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
phy-names = "host", "hsic0", "hsic1";
+
+ status = "disabled";
};
ohci: usb at 12590000 {
@@ -408,10 +409,10 @@ ohci: usb at 12590000 {
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
-
- status = "disabled";
phys = <&exynos_usbphy 1>;
phy-names = "host";
+
+ status = "disabled";
};
gpu: gpu at 13000000 {
@@ -517,10 +518,10 @@ serial_3: serial at 13830000 {
};
i2c_0: i2c at 13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
@@ -531,10 +532,10 @@ i2c_0: i2c at 13860000 {
};
i2c_1: i2c at 13870000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
@@ -545,10 +546,10 @@ i2c_1: i2c at 13870000 {
};
i2c_2: i2c at 13880000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
@@ -559,10 +560,10 @@ i2c_2: i2c at 13880000 {
};
i2c_3: i2c at 13890000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
@@ -573,10 +574,10 @@ i2c_3: i2c at 13890000 {
};
i2c_4: i2c at 138a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138a0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
@@ -587,10 +588,10 @@ i2c_4: i2c at 138a0000 {
};
i2c_5: i2c at 138b0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
@@ -601,10 +602,10 @@ i2c_5: i2c at 138b0000 {
};
i2c_6: i2c at 138c0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138c0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
@@ -615,10 +616,10 @@ i2c_6: i2c at 138c0000 {
};
i2c_7: i2c at 138d0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138d0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
@@ -629,10 +630,10 @@ i2c_7: i2c at 138d0000 {
};
i2c_8: i2c at 138e0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138e0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
@@ -740,8 +741,8 @@ mdma1: dma-controller at 12850000 {
fimd: fimd at 11c00000 {
compatible = "samsung,exynos4210-fimd";
- interrupt-parent = <&combiner>;
reg = <0x11c00000 0x20000>;
+ interrupt-parent = <&combiner>;
interrupts = <11 0>, <11 1>, <11 2>;
interrupt-names = "fifo", "vsync", "lcd_sys";
clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
@@ -754,12 +755,12 @@ fimd: fimd at 11c00000 {
};
tmu: tmu at 100c0000 {
- interrupt-parent = <&combiner>;
reg = <0x100c0000 0x100>;
+ interrupt-parent = <&combiner>;
interrupts = <2 4>;
+ #thermal-sensor-cells = <0>;
status = "disabled";
- #thermal-sensor-cells = <0>;
};
jpeg_codec: jpeg-codec at 11840000 {
@@ -793,8 +794,8 @@ hdmi: hdmi at 12d00000 {
"sclk_hdmiphy", "mout_hdmi";
phy = <&hdmi_i2c_phy>;
power-domains = <&pd_tv>;
- samsung,syscon-phandle = <&pmu_system_controller>;
#sound-dai-cells = <0>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
@@ -805,18 +806,18 @@ hdmicec: cec at 100b0000 {
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI_CEC>;
clock-names = "hdmicec";
- samsung,syscon-phandle = <&pmu_system_controller>;
hdmi-phandle = <&hdmi>;
pinctrl-0 = <&hdmi_cec>;
pinctrl-names = "default";
+ samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
mixer: mixer at 12c10000 {
compatible = "samsung,exynos4210-mixer";
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
--
2.43.0
More information about the linux-arm-kernel
mailing list