[PATCH 01/17] ARM: dts: samsung: exynos4: add or remove empty lines
Henrik Grimler
henrik.grimler at axis.com
Sun Oct 4 13:15:58 PDT 2026
For better readability it is preferred to have an empty line before
the status property, as well as before every child node. Empty lines
do not really help at start of children nodes though. Add or remove
empty lines where applicable.
dt-check-style when run in strict mode reports the issues like:
samsung/exynos4.dtsi:90: [required-blank-lines] "status" must be preceded by a blank line
Signed-off-by: Henrik Grimler <henrik.grimler at axis.com>
---
arch/arm/boot/dts/samsung/exynos4.dtsi | 58 ++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/samsung/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi
index ed47d0ce04e1..c38489a05e15 100644
--- a/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -54,6 +54,7 @@ aliases {
pmu: pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&combiner>;
+
status = "disabled";
};
@@ -87,6 +88,7 @@ i2s0: i2s at 3830000 {
dma-names = "tx", "rx", "tx-sec";
samsung,idma-addr = <0x03000000>;
#sound-dai-cells = <1>;
+
status = "disabled";
};
@@ -196,6 +198,7 @@ dsi_0: dsi at 11c80000 {
phy-names = "dsim";
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
clock-names = "bus_clk", "sclk_mipi";
+
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -204,6 +207,7 @@ dsi_0: dsi at 11c80000 {
camera: camera at 11800000 {
compatible = "samsung,fimc";
ranges = <0x0 0x11800000 0xa0000>;
+
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
@@ -220,6 +224,7 @@ fimc_0: fimc at 0 {
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
iommus = <&sysmmu_fimc0>;
+
status = "disabled";
};
@@ -233,6 +238,7 @@ fimc_1: fimc at 10000 {
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
iommus = <&sysmmu_fimc1>;
+
status = "disabled";
};
@@ -246,6 +252,7 @@ fimc_2: fimc at 20000 {
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
iommus = <&sysmmu_fimc2>;
+
status = "disabled";
};
@@ -259,6 +266,7 @@ fimc_3: fimc at 30000 {
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
iommus = <&sysmmu_fimc3>;
+
status = "disabled";
};
@@ -273,6 +281,7 @@ csis_0: csis at 80000 {
power-domains = <&pd_cam>;
phys = <&mipi_phy 0>;
phy-names = "csis";
+
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -289,6 +298,7 @@ csis_1: csis at 90000 {
power-domains = <&pd_cam>;
phys = <&mipi_phy 2>;
phy-names = "csis";
+
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -303,6 +313,7 @@ rtc: rtc at 10070000 {
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
+
status = "disabled";
};
@@ -312,6 +323,7 @@ keypad: keypad at 100a0000 {
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
+
status = "disabled";
};
@@ -321,6 +333,7 @@ sdhci_0: mmc at 12510000 {
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
+
status = "disabled";
};
@@ -330,6 +343,7 @@ sdhci_1: mmc at 12520000 {
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
+
status = "disabled";
};
@@ -339,6 +353,7 @@ sdhci_2: mmc at 12530000 {
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
+
status = "disabled";
};
@@ -348,6 +363,7 @@ sdhci_3: mmc at 12540000 {
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
+
status = "disabled";
};
@@ -358,6 +374,7 @@ exynos_usbphy: usb-phy at 125b0000 {
clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
clock-names = "phy", "ref";
#phy-cells = <1>;
+
status = "disabled";
};
@@ -369,6 +386,7 @@ hsotg: usb at 12480000 {
clock-names = "otg";
phys = <&exynos_usbphy 0>;
phy-names = "usb2-phy";
+
status = "disabled";
};
@@ -378,6 +396,7 @@ ehci: usb at 12580000 {
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
+
status = "disabled";
phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
phy-names = "host", "hsic0", "hsic1";
@@ -389,6 +408,7 @@ ohci: usb at 12590000 {
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
+
status = "disabled";
phys = <&exynos_usbphy 1>;
phy-names = "host";
@@ -405,6 +425,7 @@ gpu: gpu at 13000000 {
<&clock CLK_SCLK_G3D>;
clock-names = "bus", "core";
power-domains = <&pd_g3d>;
+
status = "disabled";
};
@@ -418,6 +439,7 @@ i2s1: i2s at 13960000 {
dmas = <&pdma1 12>, <&pdma1 11>;
dma-names = "tx", "rx";
#sound-dai-cells = <1>;
+
status = "disabled";
};
@@ -431,6 +453,7 @@ i2s2: i2s at 13970000 {
dmas = <&pdma0 14>, <&pdma0 13>;
dma-names = "tx", "rx";
#sound-dai-cells = <1>;
+
status = "disabled";
};
@@ -453,6 +476,7 @@ serial_0: serial at 13800000 {
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
dma-names = "rx", "tx";
+
status = "disabled";
};
@@ -464,6 +488,7 @@ serial_1: serial at 13810000 {
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
dma-names = "rx", "tx";
+
status = "disabled";
};
@@ -475,6 +500,7 @@ serial_2: serial at 13820000 {
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 17>, <&pdma0 18>;
dma-names = "rx", "tx";
+
status = "disabled";
};
@@ -486,6 +512,7 @@ serial_3: serial at 13830000 {
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
dma-names = "rx", "tx";
+
status = "disabled";
};
@@ -499,6 +526,7 @@ i2c_0: i2c at 13860000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
+
status = "disabled";
};
@@ -512,6 +540,7 @@ i2c_1: i2c at 13870000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
+
status = "disabled";
};
@@ -525,6 +554,7 @@ i2c_2: i2c at 13880000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
+
status = "disabled";
};
@@ -538,6 +568,7 @@ i2c_3: i2c at 13890000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
+
status = "disabled";
};
@@ -551,6 +582,7 @@ i2c_4: i2c at 138a0000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
+
status = "disabled";
};
@@ -564,6 +596,7 @@ i2c_5: i2c at 138b0000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
+
status = "disabled";
};
@@ -577,6 +610,7 @@ i2c_6: i2c at 138c0000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
+
status = "disabled";
};
@@ -590,6 +624,7 @@ i2c_7: i2c at 138d0000 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
+
status = "disabled";
};
@@ -601,6 +636,7 @@ i2c_8: i2c at 138e0000 {
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
+
status = "disabled";
hdmi_i2c_phy: hdmi-phy at 38 {
@@ -622,6 +658,7 @@ spi_0: spi at 13920000 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
fifo-depth = <256>;
+
status = "disabled";
};
@@ -638,6 +675,7 @@ spi_1: spi at 13930000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
fifo-depth = <64>;
+
status = "disabled";
};
@@ -654,6 +692,7 @@ spi_2: spi at 13940000 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
fifo-depth = <64>;
+
status = "disabled";
};
@@ -668,6 +707,7 @@ pwm: pwm at 139d0000 {
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
+
status = "disabled";
};
@@ -709,6 +749,7 @@ fimd: fimd at 11c00000 {
power-domains = <&pd_lcd0>;
iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sys_reg>;
+
status = "disabled";
};
@@ -716,6 +757,7 @@ tmu: tmu at 100c0000 {
interrupt-parent = <&combiner>;
reg = <0x100c0000 0x100>;
interrupts = <2 4>;
+
status = "disabled";
#thermal-sensor-cells = <0>;
};
@@ -753,6 +795,7 @@ hdmi: hdmi at 12d00000 {
power-domains = <&pd_tv>;
samsung,syscon-phandle = <&pmu_system_controller>;
#sound-dai-cells = <0>;
+
status = "disabled";
};
@@ -766,6 +809,7 @@ hdmicec: cec at 100b0000 {
hdmi-phandle = <&hdmi>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec>;
+
status = "disabled";
};
@@ -775,6 +819,7 @@ mixer: mixer at 12c10000 {
reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
+
status = "disabled";
};
@@ -783,6 +828,7 @@ ppmu_dmc0: ppmu at 106a0000 {
reg = <0x106a0000 0x2000>;
clocks = <&clock CLK_PPMUDMC0>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -791,6 +837,7 @@ ppmu_dmc1: ppmu at 106b0000 {
reg = <0x106b0000 0x2000>;
clocks = <&clock CLK_PPMUDMC1>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -799,6 +846,7 @@ ppmu_cpu: ppmu at 106c0000 {
reg = <0x106c0000 0x2000>;
clocks = <&clock CLK_PPMUCPU>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -807,6 +855,7 @@ ppmu_rightbus: ppmu at 112a0000 {
reg = <0x112a0000 0x2000>;
clocks = <&clock CLK_PPMURIGHT>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -815,6 +864,7 @@ ppmu_leftbus: ppmu at 116a0000 {
reg = <0x116a0000 0x2000>;
clocks = <&clock CLK_PPMULEFT>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -823,6 +873,7 @@ ppmu_camif: ppmu at 11ac0000 {
reg = <0x11ac0000 0x2000>;
clocks = <&clock CLK_PPMUCAMIF>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -831,12 +882,14 @@ ppmu_lcd0: ppmu at 11e40000 {
reg = <0x11e40000 0x2000>;
clocks = <&clock CLK_PPMULCD0>;
clock-names = "ppmu";
+
status = "disabled";
};
ppmu_fsys: ppmu at 12630000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12630000 0x2000>;
+
status = "disabled";
};
@@ -845,6 +898,7 @@ ppmu_image: ppmu at 12aa0000 {
reg = <0x12aa0000 0x2000>;
clocks = <&clock CLK_PPMUIMAGE>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -853,6 +907,7 @@ ppmu_tv: ppmu at 12e40000 {
reg = <0x12e40000 0x2000>;
clocks = <&clock CLK_PPMUTV>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -861,6 +916,7 @@ ppmu_g3d: ppmu at 13220000 {
reg = <0x13220000 0x2000>;
clocks = <&clock CLK_PPMUG3D>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -869,6 +925,7 @@ ppmu_mfc_left: ppmu at 13660000 {
reg = <0x13660000 0x2000>;
clocks = <&clock CLK_PPMUMFC_L>;
clock-names = "ppmu";
+
status = "disabled";
};
@@ -877,6 +934,7 @@ ppmu_mfc_right: ppmu at 13670000 {
reg = <0x13670000 0x2000>;
clocks = <&clock CLK_PPMUMFC_R>;
clock-names = "ppmu";
+
status = "disabled";
};
--
2.43.0
More information about the linux-arm-kernel
mailing list