[PATCH 4/5] ARM: dts: imx6ull-tarragon-common: Fix i.MX6ULL DVFS

[Stefan Wahren]

During mainlining of the Tarragon boards, we missed to wire up reg_arm
and reg_soc from PMIC to the i.MX6ULL, which result in a constant voltage
during DVFS. While fixing this, give the regulator a better node reference.

Fixes: 5e4f393ccbf0 ("ARM: dts: imx6ull: Add chargebyte Tarragon support")
Signed-off-by: Stefan Wahren <wahrenst at gmx.net>
---
 .../boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi    | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
index 81761a505d6f..afbb3be48d71 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -278,7 +278,7 @@ pfuze3001: pmic at 8 {
 		reg = <0x08>;
 
 		regulators {
-			sw1_reg: sw1 {
+			vdd_arm_soc_in: sw1 {
 				regulator-name = "SW1";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <3300000>;
@@ -774,6 +774,16 @@ &pwm8 {
 	status = "okay";
 };
 
+&reg_arm {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rs485_1>;
-- 
2.43.0