[PATCH] arm64: dts: st: add thermal zones on stm32mp251

[Mateusz Nowicki]

Add a CPU and a SoC thermal zone for the two DTS sensors, each with a
critical trip point at 120 degrees Celsius, below the 125 degrees
Celsius max junction temperature of the STM32MP25.

Signed-off-by: Mateusz Nowicki <mateusz.nowicki at posteo.net>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index b624f998b87c..fd174c88b26d 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -158,6 +158,34 @@ RET_PD: power-domain-retention {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			thermal-sensors = <&dts 1>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay = <1000>;
+			thermal-sensors = <&dts 0>;
+
+			trips {
+				soc-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&intc>;

base-commit: f831584128ac2a36fb4fa62fe106793d08c2dbf1
-- 
2.56.0