[PATCH 5/9] gpio: mxc: use devres-managed PM runtime and dev_err_probe

[Frank Li]

On Sat, Oct 03, 2026 at 08:06:47PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> Switch pm_runtime_get_noresume() and pm_runtime_enable() to their
> devm-managed variants so that pm_runtime_put_noidle() and
> pm_runtime_disable() are handled automatically by devres on both
> probe failure and device unbind.
>
> Remove the out_bgio goto label and replacing all error paths with
> direct returns using dev_err_probe(), which provides better
> diagnostic output and handles -EPROBE_DEFER.
>
> Assisted-by: LLM
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/gpio/gpio-mxc.c | 30 ++++++++++--------------------
>  1 file changed, 10 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 3c395c82d7d4..73e19d2bf235 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -474,9 +474,9 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	if (of_device_is_compatible(np, "fsl,imx8qm-gpio"))
>  		port->is_imx8qm = true;
>
> -	pm_runtime_get_noresume(&pdev->dev);
> +	devm_pm_runtime_get_noresume(&pdev->dev);
>  	pm_runtime_set_active(&pdev->dev);
> -	pm_runtime_enable(&pdev->dev);
> +	devm_pm_runtime_enable(&pdev->dev);

devm_pm_runtime_set_active_enabled() can include pm_runtime_set_active()
and need check return value here.

And why call pm_runtime_get_noresume() before enable()?

Frank

>
>  	/* disable the interrupt and clear the status */
>  	writel(0, port->base + GPIO_IMR);
> @@ -502,7 +502,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = gpio_generic_chip_init(&port->gen_gc, &config);
>  	if (err)
> -		goto out_bgio;
> +		return dev_err_probe(&pdev->dev, err, "Failed to init gpio chip\n");
>
>  	port->gen_gc.gc.request = mxc_gpio_request;
>  	port->gen_gc.gc.free = mxc_gpio_free;
> @@ -518,31 +518,27 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port);
>  	if (err)
> -		goto out_bgio;
> +		return dev_err_probe(&pdev->dev, err, "Failed to add gpiochip data\n");
>
>  	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
> -	if (irq_base < 0) {
> -		err = irq_base;
> -		goto out_bgio;
> -	}
> +	if (irq_base < 0)
> +		return dev_err_probe(&pdev->dev, irq_base, "Failed to alloc irq desc\n");
>
>  	port->domain = irq_domain_create_legacy(dev_fwnode(&pdev->dev), 32, irq_base, 0,
>  						&irq_domain_simple_ops, NULL);
> -	if (!port->domain) {
> -		err = -ENODEV;
> -		goto out_bgio;
> -	}
> +	if (!port->domain)
> +		return dev_err_probe(&pdev->dev, -ENODEV, "Failed to create irq domain\n");
>
>  	err = devm_add_action_or_reset(&pdev->dev, mxc_gpio_irq_domain_remove, port->domain);
>  	if (err)
> -		goto out_bgio;
> +		return dev_err_probe(&pdev->dev, err, "Failed to add irq_domain_remove\n");
>
>  	irq_domain_set_pm_device(port->domain, &pdev->dev);
>
>  	/* gpio-mxc can be a generic irq chip */
>  	err = mxc_gpio_init_gc(port, irq_base);
>  	if (err < 0)
> -		goto out_bgio;
> +		return dev_err_probe(&pdev->dev, err, "Failed mxc_gpio_init_gc\n");
>
>  	list_add_tail(&port->node, &mxc_gpio_ports);
>
> @@ -552,12 +548,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	pm_runtime_put_autosuspend(&pdev->dev);
>
>  	return 0;
> -
> -out_bgio:
> -	pm_runtime_disable(&pdev->dev);
> -	pm_runtime_put_noidle(&pdev->dev);
> -	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
> -	return err;
>  }
>
>  static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
>
> --
> 2.51.0
>
>