[GIT PULL 2/2] Broadcom devicetree-arm64 changes for 7.4

[Florian Fainelli]

The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:

  Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-7.4/devicetree-arm64

for you to fetch changes up to 4db272ba40c09eafda1ec0a4d59c0423561c8f7a:

  arm64: dts: broadcom: bcm2712: Add GPU IOMMU and IOMMU cache nodes (2026-09-28 11:24:14 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 7.4, please pull the following:

- Peter adjust the display DT nodes status properties since it may not
  be used by default and therefore that must be done at the board level.
  He also adds the ARM PMU, thermal monitor (TMON), USB OTG nodes.

- Gregor adds the 2712D0 stepping compatible string because there is a
  need to differientate the D0 stepping to avoid crashes on boot when an
  incorrect DTB is selected. He also adds the SPI controller to the RP1
  southbridge chip

- Stanimir adds the RP1 PWM node

- Daniel adds the GPU IOMMU and IOMMU cache nodes to the 2712 DTS

----------------------------------------------------------------
Daniel Drake (1):
      arm64: dts: broadcom: bcm2712: Add GPU IOMMU and IOMMU cache nodes

Gregor Herburger (4):
      dt-bindings: arm: bcm2835: Add 2712-d0 Stepping
      arm64: dts: broadcom: bcm2712-d-rpi-5-b: add compatible
      arm64: dts: broadcom: rp1: add spi controller
      arm64: dts: broadcom: bcm2712-rpi-5-b: add spi0 interface

Peter Robinson (4):
      arm64: dts: broadcom: bcm2712: adjust display status
      arm64: dts: broadcom: bcm2712: add arm PMU
      arm64: dts: broadcom: bcm2712: Add thermal monitor
      arm64: dts: broadcom: bcm2712: Add USB OTG port

Stanimir Varbanov (1):
      arm64: dts: broadcom: rpi-5: Add RP1 PWM node

 .../devicetree/bindings/arm/bcm/bcm2835.yaml       |   6 +
 arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts |   5 +
 .../boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi    |  41 +++++++
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts   |  34 ++++++
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi          |  91 +++++++++++++++
 arch/arm64/boot/dts/broadcom/rp1-common.dtsi       | 128 +++++++++++++++++++++
 6 files changed, 305 insertions(+)