[PATCH 1/6] dt-bindings: display: Add panel-mipi-dsi-bpf generic panel binding

[Neil Armstrong]

On 10/1/26 09:09, Maxime Ripard wrote:
> On Wed, Sep 30, 2026 at 03:32:19PM +0200, Neil Armstrong wrote:
>> On 9/29/26 10:39, Maxime Ripard wrote:
>>> Hi,
>>>
>>>
>> <snip>
>>
>>>
>>> panel-mipi-dsi-spi is a generic panel that will load a firmware, and
>>> quite similar to this one. google,android-pipe and qcom,fastrpc don't
>>> attach to anything and will just open a tunnel to userspace, which is
>>> somewhat equivalent but more dramatic than what this driver is doing.
>>> simple-card or its variations will just instantiate a kernel driver from
>>> the DT and is used pretty much everywhere.
>>>
>>> I reused the binding from panel-mipi-dsi-spi for this. It was reviewed
>>> by rob, and acked by a panel maintainer, and 4 years ago, so we're way
>>> past the "oh but we didn't know what we were doing back then" argument.
>>>
>>> So, let's phrase this differently: what's different about the
>>> description than panel-mipi-dsi-spi, or any other binding already in
>>> tree?
>>
>> The panel-mipi-dsi-spi still describes a class of H/W control interface,
>> not a pure software driver implementation type.
>>
>> "panel-mipi-dsi-bpf" or "panel-mipi-dsi-rust" or "panel-mipi-dsi-cplusplus"
>> would be the same problem.
> 
> Rob explicitly said the bpf part wasn't the problem. Also, I don't care
> for the compatible itself, so what would be an acceptable compatible for
> you?
> 
>>> If it's the BPF part, BPF is not Linux-only, and there's hardware with
>>> direct BPF support these days, so it can be considered OS-agnostic and
>>> not an implementation detail.
>>
>> If somehow panels used a standardized MIPI firmware we could define this
>> in DT, but here we're basically inventing our own type of firmware from
>> thin air.
> 
> That's not what panel-mipi-dsi-spi is.

What you describe is how it's implemented in software

Neil

> 
> Maxime