[PATCH v1 2/2] ARM: dts: imx6ull-colibri-iris: enable SPI

[Daniel Baluta]

On 10/1/26 18:53, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini at toradex.com>
> 
> The Colibri SSP is routed to the X16 extension connector on the Iris
> carrier board, and a device can be instantiated from user space through
> the spi_master new_device sysfs interface, so enable the controller here
> too, as the Colibri iMX7 Iris device tree already does.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>

Reviewed-by: Daniel Baluta <daniel.baluta at nxp.com>

> ---
>  arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
> index bce6fbf230b3..5e408e54b335 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
> @@ -52,6 +52,11 @@ &adc1 {
>  	status = "okay";
>  };
>  
> +/* Colibri SSP */
> +&ecspi1 {
> +	status = "okay";
> +};
> +
>  &gpio1 {
>  	/*
>  	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the