[PATCH v1 1/2] ARM: dts: imx6q-apalis: enable SPI1 and SPI2

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

Apalis SPI1 and SPI2 are routed to user accessible connectors on both
boards, X27 and X24 on Ixora and X38 on the Evaluation Board, and a
device can be instantiated from user space through the spi_master
new_device sysfs interface, so enable the controllers here too, as the
Apalis iMX8 boards already do.

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi      | 10 ++++++++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 10 ++++++++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts      | 10 ++++++++++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
index b6c45ad3f430..a2ab075ce120 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
@@ -31,6 +31,16 @@ reg_3v3_sw: regulator-3v3-sw {
 	};
 };
 
+/* Apalis SPI1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	status = "okay";
+};
+
 &i2c1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 3ac7a4501620..6ef2a986ca8c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -100,6 +100,16 @@ &can2 {
 	status = "okay";
 };
 
+/* Apalis SPI1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	status = "okay";
+};
+
 &gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart24_forceoff>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
index f338be435277..6b5393accc09 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
@@ -65,6 +65,16 @@ &can2 {
 	status = "okay";
 };
 
+/* Apalis SPI1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	status = "okay";
+};
+
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
 	status = "okay";
-- 
2.47.3