[PATCH v4 00/18] KVM: arm64: Confine protected VM vCPU state to EL2
Fuad Tabba
fuad.tabba at linux.dev
Thu Oct 1 06:56:53 PDT 2026
Hi folks,
Changes since v3 [1]:
- A protected vCPU that EL2 holds powered off reads as
KVM_MP_STATE_UNINITIALIZED, in place of a new bool. (Marc)
- The marshalling and PSCI patches access the host copy through the
vCPU accessors, with every assignment on one line. (Marc)
- The PC adjustment pair is kvm_adjust_pc_get()/put() and tests for
the hyp vCPU directly. (Marc)
- CPU_OFF clears the reset flag before its release of OFF, CPU_ON's
relaxed cmpxchg is ordered by its control dependency, and the
CPU_ON rollback stores OFF with a release. pkvm_reset_vcpu()
carries the CPU_ON/CPU_OFF sequence as a comment and drops its
WARN_ON(). (Vincent, Will)
- Collected Reviewed-bys.
Following the vCPU state-sync series [3], this series completes the
job for protected VMs: a protected guest's register state stays at
EL2, and the host sees only what handling each exit requires.
EL2 marshals a protected vCPU's state per exception class instead of
copying the whole context both ways. It owns the vCPU's trap
configuration, system register reset and HVC handling, and implements
PSCI itself: AFFINITY_INFO is left to the host, and CPU_ON and CPU_OFF
are resolved at EL2 with the host only scheduling the target or
stopping it. A protected guest's TRNG calls, which the host handled
until now, return NOT_SUPPORTED until TRNG for protected guests
follows. EL2 implements PSCI 1.1, so a protected guest also loses the
functions the host supports above that version, SYSTEM_OFF2 included.
Host ioctls that would reach the state EL2 owns fail with -EPERM, so a
protected VM's state isn't save/restorable. All of this is scoped
to KVM_VM_TYPE_ARM_PROTECTED, and pkvm.rst describes the resulting API.
The kvmtool changes that go with this are posted separately [4].
Patches 1 to 3 go out separately: the HCR_EL2.VSE fix [5], and the
host vCPU VM read and pin fixes, patches 4 and 5 of the host hypercall
fixes series [2]. None of the three is part of this series. They're
carried so the series applies as is and Sashiko can run on it.
The KVM_ARM_PREFERRED_TARGET documentation fix [6] went out just ahead
of v1. Nothing here depends on it to apply, but patch 18 documents vCPU
feature availability as something the capabilities report, while
api.rst 4.83 still points userspace at a bitmap that has always been
empty.
The series is structured as follows:
01: The HCR_EL2.VSE fix, posted separately.
02-03: The host vCPU VM read and pin fixes, posted separately.
04: Steal time disabled for protected VMs.
05-06: Per-exception-class entry handlers; EL2 owns a protected
vCPU's trap configuration.
07-09: Timer state, system register reset and HVC handling at EL2.
10-11: PSCI at EL2, and the KVM_ARM_VCPU_INIT and PSCI version
restrictions.
12-14: Host PC adjustments blocked; an UNDEF at EL2 for exit
classes the host doesn't emulate; per-class state
marshalling.
15-16: Host changes to private state, and host power-on of a vCPU
EL2 holds powered off, rejected.
17: Capability allowlist.
18: Documentation.
Still to come: selftests, TRNG, self-hosted debug and SVE for protected
guests, and much more, as separate series.
Based on v7.3-rc3 (fd73f4a665989).
Cheers,
/fuad
[1] https://lore.kernel.org/all/20260914113338.159227-1-fuad.tabba@linux.dev/
[2] https://lore.kernel.org/all/20260915123846.2317931-1-fuad.tabba@linux.dev/
[3] https://lore.kernel.org/all/20260729131823.2021516-1-fuad.tabba@linux.dev/
[4] https://lore.kernel.org/all/20260831192406.1341841-1-fuad.tabba@linux.dev/
[5] https://lore.kernel.org/all/20260829071120.2522788-1-fuad.tabba@linux.dev/
[6] https://lore.kernel.org/all/20260831162815.269851-1-fuad.tabba@linux.dev/
Fuad Tabba (16):
KVM: arm64: Sync HCR_EL2.VSE back to the host vCPU under pKVM
KVM: arm64: Validate the host vCPU's VM before reading it under pKVM
KVM: arm64: Pin the host vCPU before adjusting its PC under pKVM
KVM: arm64: Disable steal time for protected VMs
KVM: arm64: Skip fixed-feature state flush for protected vCPUs
KVM: arm64: Add system register reset framework for protected VMs
KVM: arm64: Implement HVC handling for protected guests at EL2
KVM: arm64: Handle PSCI calls for protected VMs at EL2
KVM: arm64: Restrict KVM_ARM_VCPU_INIT and PSCI version for protected
VMs
KVM: arm64: Prevent host PC adjustments for protected vCPUs
KVM: arm64: Inject an UNDEF at EL2 for unhandled protected guest exits
KVM: arm64: Add per-EC entry/exit state marshalling for protected
guests
KVM: arm64: Reject host access to protected VM private state
KVM: arm64: Reject host power-on of a vCPU that EL2 holds powered off
KVM: arm64: Advertise the capabilities that protected VMs support
KVM: arm64: Document the protected VM userspace API
Marc Zyngier (2):
KVM: arm64: Introduce per-EC entry handlers for pKVM
KVM: arm64: Add {flush,sync}_hyp_timer_state() primitives
Documentation/virt/kvm/api.rst | 27 +-
.../virt/kvm/arm/fw-pseudo-registers.rst | 2 +
Documentation/virt/kvm/arm/pkvm.rst | 164 ++++-
Documentation/virt/kvm/devices/vcpu.rst | 3 +-
arch/arm64/include/asm/kvm_host.h | 22 +-
arch/arm64/include/asm/kvm_hyp.h | 4 +
arch/arm64/include/asm/kvm_pkvm.h | 33 +
arch/arm64/kvm/arm.c | 76 ++-
arch/arm64/kvm/guest.c | 11 +
arch/arm64/kvm/hyp/exception.c | 26 +-
arch/arm64/kvm/hyp/include/hyp/adjust_pc.h | 48 ++
arch/arm64/kvm/hyp/include/nvhe/pkvm.h | 20 +
arch/arm64/kvm/hyp/nvhe/hyp-main.c | 595 +++++++++++++++++-
arch/arm64/kvm/hyp/nvhe/pkvm.c | 422 ++++++++++++-
arch/arm64/kvm/hyp/nvhe/switch.c | 29 +-
arch/arm64/kvm/hyp/nvhe/sys_regs.c | 60 ++
arch/arm64/kvm/hypercalls.c | 7 +
arch/arm64/kvm/pkvm.c | 21 +-
arch/arm64/kvm/psci.c | 11 +-
arch/arm64/kvm/pvtime.c | 10 +-
20 files changed, 1503 insertions(+), 88 deletions(-)
base-commit: fd73f4a6659897191fa0d40695fe370925dd3780
--
2.39.5
More information about the linux-arm-kernel
mailing list