[GIT PULL 4/7] firmware/tegra: Changes for v7.4-rc1

[Rafael J. Wysocki (Intel)]

Thierry, Arnd,

On Wed, Nov 4, 2026 at 3:41 PM Thierry Reding <thierry.reding at kernel.org> wrote:
>
> On Wed, Nov 04, 2026 at 03:11:09PM +0100, Arnd Bergmann wrote:
> > On Wed, Nov 4, 2026, at 13:42, Thierry Reding wrote:
> > > On Tue, Oct 13, 2026 at 07:22:23PM +0200, Arnd Bergmann wrote:
> > >> On Sat, Oct 3, 2026, at 11:59, Thierry Reding wrote:
> > >>
> > >> Where is the ACPI binding documentation for this driver, and who is
> > >> responsible for reviewing it?
> > >
> > > Hi Arnd, Rafael, Len,
> > >
> > > Sorry for the late reply, this fell through the cracks.
> > >
> > > Admittedly there's not much of a formal process here at all. Anything
> > > I've received up to now seemed to be fairly straightforward support
> > > extensions like this where the ACPI tables basically provide the same
> > > information as the DT via standard resources like register ranges.
> > >
> > > I suppose for anything beyond this, we'll want better documentation and
> > > broader review.
> > >
> > > Is there anything in particular that you're looking for? Should I guide
> > > people internally to always Cc linux-acpi for anything that concerns
> > > ACPI?
> >
> > I don't know, I'm also still learning about how this is done, I
> > was hoping that there was already an established way.
>
> Yeah, me too. Maybe Rafael and Len can provide some guidance here.

I cannot speak for Len, and he has not been actively involved in the
maintenance of ACPI support in the kernel for several years.

As far as I'm concerned, the code maintained by me is mostly located
in drivers/acpi/ (as per the relevant MAINTAINERS entries) and it is
mostly generic code related to ACPI support.  I generally don't
maintain device drivers using ACPI support except for the ones under
drivers/acpi/ which mostly bind to devices representing interfaces
defined in the ACPI specification (which is kind of a special case).

But there is more.  There is ACPI support code in other places (like
for instance gpiolib-acpi maintained by Andy and Mika, or platform-x86
drivers maintained by Ilpo) and there are experienced kernel
developers in the ARM ecosystem with quite a bit of ACPI-related
knowledge (Hans, Jonathan, Sudeep, Lorenzo - all CCed) who can be
reached out to for guidance (and arguably they have more experience
with ARM platforms than I do).

> I don't know how ACPI on more traditional platforms works, but I imagine
> that it's a lot of the same anyway, except perhaps that people have more
> experience with the spec and today might be doing a good job already.

If you have any specific questions, I think I should be able to answer
at least some of them, but I'm afraid I cannot give you general
guidance on how to do ACPI support in device drivers that would be
universally useful.  Different drivers have different needs.

There are things in ACPI that are not present in DT and vice versa.
It also depends on what bus types we're talking about (platform vs PCI
vs USB etc).

> > Having a review done by the ACPI maintainers would definitely

So as per the above, who exactly do you mean by "ACPI maintainers"?
If you mean "the people maintaining the code in drivers/acpi/", that's
just me and quite frankly, I'm not sure if my review, specifically,
would be super-useful for driver development (the fact that my review
bandwidth is almost completely saturated nowadays aside).

My recommendation would be to ask other people within the ARM
ecosystem who have more experience with ACPI for help.

> > help from my point of view, but I'm not sure whether they are
> > set up for that, in case there are a lot of new drivers.

I am not and had I been trying to do it, it wouldn't have scaled anyway.

> I think platform maintainers need to be a first line of defense here
> since they sit at the intersection of a lot of this. At least that's the
> case for me. Also, I'm eager to learn how to do this right, but I'm
> often at a loss of where to start. The spec is a bit daunting, and then
> there's various extensions, too. Maybe the AI genies can help me ramp
> up.

My advice would be to reach out to people within your ecosystem in the
first place.

> > I assume there is a knowledge gap in both subsystem maintainers
> > regarding ACPI (certainly this is the case for me for drivers/bus,
> > drivers/firmware, drivers/soc, etc) and ACPI maintainers regarding
> > many of the subsystems that we support with DT.
>
> Agreed. I've seen some patches where the ACPI support was as simple as
> just adding an ID table entry and the rest was all standard, but I think
> once we move beyond standard resources things might get a bit more
> complicated. I imagine that ACPI may not even have specs for certain
> aspects that we currently handle in DT...

That certainly is true, but the ACPI specification is under active
development and pieces that are missing can be added to it.  There is
a process for that in place and ARM people take part in it.