[PATCH 08/10] ARM: dts: imx6ulz: Configure UART2 pins on BSH SMM-M2 variants

[Haoning Cheng]

From: Akhil Narayanan <akhil.narayanan at in.bosch.com>

Configure the UART2 RX and TX pin multiplexing for the BSH SMM-M2
variants.

Signed-off-by: Akhil Narayanan <akhil.narayanan at in.bosch.com>
Signed-off-by: Haoning Cheng <Haoning.CHENG at cn.bosch.com>
---
 arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2-common.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2-common.dtsi
index 5c9109da6806..93d662ec875f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2-common.dtsi
@@ -34,6 +34,8 @@ &snvs_poweroff {
 };
 
 &uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
@@ -86,4 +88,11 @@ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
 		>;
 	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+		>;
+	};
 };

-- 
2.43.0