[PATCH 2/4] ARM: dts: aspeed: x570d4u: Fix fan tach channel assignments

[Renze Nicolai]

The tachometer channel numbers for FAN4, FAN5 and FAN6 did not match
the board's actual PWM wiring, causing incorrect fan speed readings.
FAN6 is wired to PWM5 and FAN5 is wired to PWM6 (not PWM6/PWM5
respectively as previously assigned), and FAN4's tach channel was
off by one.

Signed-off-by: Renze Nicolai <renze at rnplus.nl>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 7d27833b761d..6e7e3e7ec101 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -320,19 +320,19 @@ fan at 2 {
 	fan at 3 {
 		/* FAN4 (6-pin) */
 		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
 	};
 
 	fan at 4 {
-		/* FAN6 (6-pin) */
+		/* FAN6 (6-pin), wired to PWM5 */
 		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
 	};
 
 	fan at 5 {
-		/* FAN5 (6-pin) */
+		/* FAN5 (6-pin), wired to PWM6 */
 		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
 	};
 };
 
-- 
2.56.0