[PATCH v1 0/2] arm64: dts: freescale: imx95-aquila: Keep DP_PWR always enabled

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

DP_PWR on the DisplayPort connector powers active DP cables and
adapters, which do not work without it. Keep it always enabled, and mark
it boot-on so that the firmware, e.g. U-Boot, enables it at boot,
whether or not a display driver is available.

Francesco Dolcini (2):
  arm64: dts: freescale: imx95-aquila-dev: Keep DP_PWR always enabled
  arm64: dts: freescale: imx95-aquila-clover: Keep DP_PWR always enabled

 arch/arm64/boot/dts/freescale/imx95-aquila-clover.dts | 2 ++
 arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts    | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.47.3