[PATCH] arm64: dts: ti: k3-am62x-sk: Add orientation to IMX219 sensor node

[Thorsten Lannynd]

The IMX219 CSI2 expansion module is externally attached. Without the
orientation property, V4L2_CID_CAMERA_ORIENTATION (0x009a0922) is not
exposed and libcamera fails with:

  ERROR CameraSensor camera_sensor_raw.cpp:465 'imx219 4-0010':
  Mandatory V4L2 control 0x009a0922 not available

Set orientation = <2> (V4L2_CAMERA_ORIENTATION_EXTERNAL) to fix this.

Signed-off-by: Thorsten Lannynd <t-lannynd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 149c59c07182..829ed98345dd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -72,6 +72,7 @@ ov5640: camera at 10 {
 				VDDL-supply = <&reg_1p2v>;
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+				orientation = <2>;
 
 				port {
 					csi2_cam0: endpoint {
-- 
2.34.1